and one white audio input. The model # of the dvd player is AR900. It only has one video output. I lost the cable that came with it.
2006-10-24 19:11:21 · 4 answers · asked by ocean 3 in Consumer Electronics ➔ Home Theater
ur tv is too old. u need to replace it with a newer 1. you cannot use "progressive scan" with the tv u have. progressive scan requires a hd tv. also ur tv is MONO not STEREO, hence the 1-white audio input. the dvd player will hook up, but it will not be "progressive scan", or even in stereo.
2006-10-25 12:49:58 · answer #1 · answered by jbua5150 2 · 1⤊ 0⤋
Yellow cable is standard video, the cable will cost like $3 at best buy. Red and white are audio left and audio right. If your TV has a lone white output, it's a mono and you won't get stereo sound. Most DVD playerts have stereo output.
2006-10-25 02:20:53 · answer #2 · answered by laxeroflax04 2 · 0⤊ 0⤋
Just plug in a cable between the video
on the TV to the video connection on
the DVD player. Any cable with RCA
connectors will work, although a dedi-
cated video cable will have more shield-
ing from outside interferences. Get one
with gold plated RCA connectors for best
performance results.
I would get and plug a pair of audio cables
to the receiver or preamplifier and if you
want to use the TV's speakers, you can
connect a cable (right or left) from the
receiver to the TV -and voila!
H a p p y
H o m e
T h e a t e r i n g !
2006-10-26 10:45:11 · answer #3 · answered by Anonymous · 0⤊ 0⤋
It should have a red input on your tv too. You will need the correct lead, walmart or best buy will have it reasonably cheap.
2006-10-25 02:21:56 · answer #4 · answered by darkness_returns 4 · 0⤊ 0⤋