English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

3 answers

P0171: Fuel Trim System Lean (Bank 1)
P0125: Insufficient Coolant Temperature for Closed Loop Fuel Control;
ECT Excessive Time to Closed Loop Fuel Control

Looks like the coolant temperature sensor is bad. should cost you around $30, that will probalby take care of the fuel trim lean problem as well.
sometimes 1 code can create extra problems.

2006-10-23 07:30:43 · answer #1 · answered by Eric F 6 · 0 0

A code P0171 may mean that one or more of the following has happened:

The MAF (Mass Air Flow) Sensor is dirty or faulty. Note: The use of "oiled" air filters (K&N, etc.) can cause the MAF to become dirty if the filter is over-oiled
There could be a vacuum leak downstream of the MAF sensor.


A code P0125 may mean that one or more of the following has happened:

Insufficient warm up time
Low engine coolant level
Leaking or stuck open thermostat
Faulty coolant temperature sensor

2006-10-23 14:31:04 · answer #2 · answered by Wil T 3 · 0 0

plug scaner in at autozone oradvance or o reilly and get a print out for free...no kidding.

2006-10-23 14:26:02 · answer #3 · answered by Anonymous · 0 2

fedest.com, questions and answers