After every wash the fabric softner compartment is full of water has just started happening!
2006-10-23 06:23:36 · 13 answers · asked by mel h 1 in Consumer Electronics ➔ Other - Electronics
dont know
2006-10-23 08:32:56 · answer #1 · answered by Anonymous · 0⤊ 0⤋
I had the same problem. After every wash there is just water left there. The conditioner has still gone into the wash, though. Take out the tray in the drawer where you put the conditioner. You will see there is a connecting tube built in to it that takes the conditioner into the drum to mix with the wash. This connecting tube will be blocked. Use a pipe-cleaner to remove any blockage, or put one end under the cold water tap and give it a quick blast (what I did). This will sort you out.
2016-03-28 05:06:19 · answer #2 · answered by Anonymous · 0⤊ 0⤋
Its sounds like you need to clean it regularly. After every wash I take the drawer out and give it a good clean. I've never had it clog up yet and I have had that machine for a few years now. Just get into the habit/routine of doing this and you will get years more use out of your machine.
2006-10-23 06:53:05 · answer #3 · answered by DeeDee 4 · 0⤊ 0⤋
As above! The water is there to flush out the softener when its used , but in your case the drain holes are blocked. Pull the drawer out (if you can) and give it a clean up.
2006-10-23 06:29:13 · answer #4 · answered by jayktee96 7 · 0⤊ 0⤋
I agree with everyone who tells you to take out the drawer and clean it up. I suffered from the same problem until I realised the drawer came out! Sometimes it requires a little lift up from the front to release it from the safety mechanism.
2006-10-23 06:37:22 · answer #5 · answered by wendy k 3 · 0⤊ 0⤋
Most likely your water level sensor is miss adjusted, allowing water level to be excessive, therefore water is floating your softener reservoir. It is hard to answer for sure since there is many different kinds of softener delivery systems.
2006-10-23 07:07:17 · answer #6 · answered by StanleyB51 4 · 0⤊ 0⤋
on most washers you can take out the drawer from the machine, do this and clean it, it sounds like it is stuck closed with residue of softener or powder.
2006-10-23 06:30:24 · answer #7 · answered by Anonymous · 0⤊ 0⤋
yes u need to clean out the drawer
2006-10-23 06:31:43 · answer #8 · answered by nosy old lady 5 · 0⤊ 0⤋
it's probably clogged from by fabric softner residue
2006-10-23 06:26:33 · answer #9 · answered by schoolot 5 · 1⤊ 0⤋
I pulled the drawer out & cleaned it & still it fills up with water so if you find out please inform me too `cos i`m curious.
2006-10-23 06:37:11 · answer #10 · answered by edison 5 · 0⤊ 0⤋
It is supposed to, it is supposed to flush out the softener into the rinse.
2006-10-23 06:29:56 · answer #11 · answered by Thomas S 6 · 0⤊ 0⤋