Hey..I blowed a fuse INSIDE my AMP..and I'm looking for the chip so i can replace it but i can't find anywhere

Question

PICTURES WOULD HELP....WEB-SITES...anything..even tellig me that it's not possible..JUST LET ME KNOW PLEASE

THANKS

It's inside the main board......were the resistors are at..

Answer 1

I'm assuming you blew the power fuse because a mosfett chip in your amp is blown or burned. First thing is to have the number on top of the chip, Then it needs to be desoldered from the amp board and replaced with an exact replacement. Try here. http://www.4starelectronics.com/part_search.asp also here... http://www.alliedelec.com/default.asp Good Luck

Answer 2

A fuse? a fuse you would easily be replaced. You would just remove the blown one and take it into your local Radio shack or similar supplier for a replacement part. There are multiple components on the amp board that might have been damaged. Are you sure it's a fuse?

Answer 3

Another good source is to call the manufacturer's cust support line and asked for their authorized parts distributor. usually they have a handfull to serve the US by region.
Or look up East Coast Parts in New York NY, or Pacific Coast Parts in Gardena CA.

Answer 4

look for what the other person said about the olastic cover and if you can't find it than you need to get a new amp or take it to a pro to have it fixed it it is some thing that can be fixed.when a amp that i have had has stoped working i would just go and get a new one.

Answer 5

if it's a fuse, usually there are little round plastic covers that you can pop off to access the fuse. If it's not a replacable fuse, then you blew something else and you're SOL.

Answer 6

Need more infos about the fuse.Try ebay