when twisting drywall screws into my skull, should i use a flathead screw driver or a phillips and should i use flathead or panhead screws.
2006-10-20 21:41:45 · 5 answers · asked by robert l 1 in Health ➔ General Health Care ➔ Pain & Pain Management
The type of screw is less important than the location.
Ensure you have consulted a good anatomy book, to ensure the desired effect on the brain. Apparently just above the eye is good for a DIY lobotomy.
2006-10-20 22:21:32 · answer #1 · answered by Anonymous · 0⤊ 0⤋
Flathead screws will countersink better and give you a neater appearance. Phillip's head screws give you more control, especially when screwing into your head. Panhead screws should be saved for special occasions only; brass ones make a bold fashion statement.
2006-10-20 21:47:04 · answer #2 · answered by weary0918 3 · 0⤊ 0⤋
i would say use the hex panhead type. less slippage. also, when drilling into your skull, you might want to try the 8 inch lag bolts. you'll be able to see them come out the other side. cool!
2006-10-21 00:02:07 · answer #3 · answered by ? 3 · 0⤊ 0⤋
I would also go with the flathead screws - if you countersink them properly, your comb wont bump over them when you comb your hair.
2006-10-20 22:11:24 · answer #4 · answered by DashRockwood 3 · 0⤊ 0⤋
If I were you I would try using a nail gun. Works faster.
2006-10-20 21:52:33 · answer #5 · answered by silverman 3 · 0⤊ 0⤋
use self tapping or use deck nails you cannot pull them out.
2006-10-22 17:53:20 · answer #6 · answered by duc602 7 · 0⤊ 0⤋