I thought there would be a plug on it and there,s not
2006-10-19 01:36:41 · 5 answers · asked by snugerbun 1 in Consumer Electronics ➔ Other - Electronics
you need to call an electrician out to fit it, it wires directly into a socket I think
2006-10-19 01:39:28 · answer #1 · answered by jmather62 2 · 0⤊ 0⤋
MAKE SURE YOU TURN THE ELECTRICITY OF FIRST.
If you're replacing an old cooker or there's been an cooker in the kitchen already ,there should be a "spur" on the wall,(its a white plastic square cover,the same size as a normal socket)near a big socket with a red light on it,it's just like a normal plug with three wires in it,you just match them up to the colours from the new cooker wire.
the only tools you'll need are a srewdriver and maybe something for cutting the coating of the new wires.
2006-10-19 09:00:32 · answer #2 · answered by twinsen110 4 · 0⤊ 0⤋
If you mean a full size freestanding cooker, it will have to be connected on an exclusive circuit of at least 32amps, and have an isolator fitted adjacent to it.
2006-10-19 02:12:13 · answer #3 · answered by jayktee96 7 · 0⤊ 0⤋
You should really get an electrician to fit it because it should have an isolation switch ( one of them red ones with red lights on) and possibly have its own fuse as well.
2006-10-19 01:40:18 · answer #4 · answered by JCMG 2 · 0⤊ 0⤋
Legally, you are now required to get an electrician to fit it.
2006-10-19 04:27:04 · answer #5 · answered by Anonymous · 0⤊ 0⤋