Ok. i have a legacy 1200 watt anp hooked to 2 sony 12's. My questions is why did my amp quit having sound come, out when it will still turn on? Before i smacked the amp a couple times and it would work for about 15 seconds and quit. I did this about three times and gave up. Did i possibly burn out the rca inputs on the amp or something else wrong,. I opend the amp and nothing is burnt or smelled burnt. It can't be a ground because the amp would not turn on without it.
2006-10-17 15:13:01 · 3 answers · asked by tony4321_1 1 in Cars & Transportation ➔ Car Audio
try hooking it up back to its original setting. if it still don't work, u might just burnt some of the major circuitry inside....
2006-10-17 15:16:17 · answer #1 · answered by Khairudin Bin Salim 4 · 0⤊ 0⤋
legacy amps usually have a protect light on it, is your's on? if it is there is a short somewhere, check all your wires and reconnect them to ensure a good connection. make sure you check both ends of the wires, not at just the amp.
2006-10-19 07:19:13 · answer #2 · answered by Bruce 3 · 0⤊ 0⤋
it can be your ground it might not be puting out 12v, are all the wires hook up right and are they all tight? you might have blown your speakers and the amp is fine. since it dont smell burnt.
2006-10-17 22:43:11 · answer #3 · answered by dusty k 2 · 0⤊ 0⤋