2006-10-16 08:38:23 · 7 answers · asked by Jerry H 1 in Cars & Transportation ➔ Car Makes ➔ Ford
Remove the bumper? You gotta be kidding. You remove the headlamp assembly then reach your hand in and turn the socket for the park lamps a 1/2 turn and remove them. Bumper, sheesh, work smarter, not harder.
2006-10-16 15:21:24 · answer #1 · answered by yugie29 6 · 0⤊ 0⤋
1999 Ford Taurus Headlight Assembly
2016-10-21 00:25:18 · answer #2 · answered by neubert 4 · 0⤊ 0⤋
if it is anything like my ford all you do is remove the headlight assembly (phillips screwdriver) pull it out and turn out the bulb. Maybe if you want a whole lot of room to work with you can take off the bumper if you've got time, but it's a whole lot faster to just take off the headlight assembly and replace the bulb.
2006-10-16 16:07:01 · answer #3 · answered by lil miget_festiva 1 · 0⤊ 0⤋
Man, this is one of Ford's better designs. You have to remove the front bumper to get to the bulbs. You have to get the car up enough in the front end to remove the bolts to get the bumper off. I will say that this is the worse design that Ford came up with
2006-10-16 11:59:45 · answer #4 · answered by Josh S 7 · 0⤊ 0⤋
get a screw driver take the linse cap off the take out the bulb then check and see if it works
2006-10-16 08:43:14 · answer #5 · answered by vw66hotbugtallen 2 · 0⤊ 0⤋
Not sure but possibly open the hood and change from the inside.
2006-10-16 08:42:46 · answer #6 · answered by tumbleweed1954 6 · 0⤊ 0⤋
one of two ways either by removing the lens or going in from behind the lens housing. simple job.
2006-10-17 11:21:07 · answer #7 · answered by duc602 7 · 0⤊ 0⤋