am having problems starting my baxi solo power flued gas boiler. pump is ok, fuses and overheat stats are ok. anyone got any suggestions...would be most grateful
2006-10-16 06:18:28 · 5 answers · asked by fred a stair 2 in Consumer Electronics ➔ Other - Electronics
If you are using it for the first time now that there is a Nip in the Air ? Have you switched the Central Heating Switch on?
The Pump would be working because it also Heats your Hot Water doesn't it.
Have you got a Baxi Combi Boiler or is it a Back Boiler?
Hope this helps.
2006-10-16 06:26:03 · answer #1 · answered by yvemaria1937 2 · 0⤊ 0⤋
If it has a condensate trap i'd get that checked out. I have had two Baxi barcelona boilers, and the condensate trap melted frequently with no apparent danger signsreplaced about 5 in each and ended up with a new boiler each time, ie overheating warnings etc (get a Corgi engineer if in UK). COuld also be the ignition circuit - notorious on Baxis
2006-10-16 06:29:56 · answer #2 · answered by MrsMac 4 · 0⤊ 0⤋
If you can see or hear a spark in the combustion chamber, then it is a gas problem. Faulty gas valve?
If no spark then it is either fan or air pressure switch faulty.
2006-10-16 06:30:51 · answer #3 · answered by Rooster 2 · 0⤊ 0⤋
read the instructions carefully about lighting the pilot light.. normally inside the flap..
2006-10-16 06:20:34 · answer #4 · answered by paulrb8 7 · 0⤊ 0⤋
it could be the thermostat if it keeps going cold
2016-03-28 11:44:35 · answer #5 · answered by Anonymous · 0⤊ 0⤋