I have a sony TV but it doesn't have video output.i want 2 put a vcd/dvd player on it.any suggestion?

Question

my sony TV doesn't have the yellow, white, red stuff (video output) where you usually connect the vcd/dvd palyer. i badly need suggestions so that I can use it to watch movies, etc. thanks a lot!

Answer 1

you can get a vcr with input and connect it to your tv with coaxial cable then hook your dvd player to the vcr. (those are inputs youre talking about, not outputs.)

Answer 2

First of all, I think what you're referring to is 'digital input' (to input signal into the TV. output is to transmit a signal from/out of the TV). What year does your TV produced/bought? As far as I know, most (if not all) TV from 14" up from the past 10 years should already have 'digital input' built in it. Are you sure you've checked the front and the back of the TV? If you still can't find anything, you could try to go to electronic stores and look for 'signal converter' to convert the digital signal of your DVD video output to analog signal, and plug it into the antenna plug of the TV. Then you could plug your DVD audio output to separate speakers or stereo set. Don't expect high quality for these converters though, as they are the 'last resort' for this kind of problem.
Another way, of course you could buy a new set of TV with 'digital input'.

Answer 3

Use a VCR. You run an antenna type coax from the antenna out put to the antenna in put on your TV. Then hook the DVD via the RCA jacks to the VCR.

Answer 4

RADIO SHACK has this wonderful $30 <

Answer 5

you can buy an "RF MODULATOR" .Just connect the DVD output on the RCA jacks,the other end to the antenna.(",)

Answer 6

Please make advantageous your video is nicely matched with sony walkman, or you may no longer positioned it on your sony walkman. and then with a converter to transform your video to sony walkman supported video format. i pick pchand video converter

Answer 7

YOU CAN BUY AN ADAPTOR FOR THIS. IT CONNECTS TO THE ANTENNA SOCKET.