How to make a lightsaber?

Question

i really want to make a lightsaber cause i am a starwars fan but i dont know how/ where to get 1

Answer 1

You will first need to find a flux capacitor, this will need to be highly modified to be able to insert it into a standard rayovac flashlight housing. Four hi voltage knibbling pins will need to be wired into a series parallel resonant configuration and connected with your standard early model horn button. Be carefull when you do this as a short may cause a nuclear reaction in the core of the flux capacitor!

Answer 2

To make a light saber, you start with a flashlight, preferably a high powered one like a maglight. You will need to purchase a couple of lighting gels, such that are used in theatre to color the lights.

To order the gels, go to gamonline.com , they will have the gels. You'll need one called 'cyc silk' and, if you want color, look at 'no-color' pink or blue or 'bastard amber'.

Once you have the gels, the striations of the silk should form the 'laser' portion, meaning they should form the length. put the color on the inside of the silk, make a cone of the gels and attach them to the flashlight with black vinyl electrical tape. You can use clear 'scotch tape' to form the seam that is along the gels.

Enjoy your light saber! Watch out for Darth Vader...I hear he's a mean one with his!

Answer 3

All you need is a cheap d-cell flashlight and a three foot long peice of paper and tape. 1. Wrap the paper length wise around the tip of the flashlight . 2. tape the paper around the tip of the flashlight. then 3. tape the paper tube so it does not flop open. Then have hours and hours of fun. !!

Answer 4

#1 Powerful Tactical Flashlight : http://FlashLight.uzaev.com/?RUfe

Answer 5

steal one from a jedi and get the heck out of there.

Answer 6

flashlight