blower motor switch only works on high what can be the problem they say its a resistor and where is it located on the vehicle. Any help will be greatly appreciated.
2006-10-14 15:41:16 · 3 answers · asked by vorshad 1 in Cars & Transportation ➔ Car Makes ➔ Dodge
The trouble is in the switch it has to be replaced.
2006-10-14 15:47:11 · answer #1 · answered by smoke 4 · 0⤊ 0⤋
It depends on the model. Vans and Trucks the resistor block was usually behind the glove box. It you find it and remove it, check to see if it has a diode across the coils. If it does, clip the diode out and reconnect to see if you now have all speeds for the blower.
2006-10-15 18:13:45 · answer #2 · answered by RLA 2 · 0⤊ 0⤋
Most of the time it is the resister. Change it out, but do yourself a favour by changing out the connector as well, as it is most probably toast from over heating. Buy a manual for your ride, this will tell you where it is and will be an easy fix if you have the patients to read the instructions. Hope this helps.......
2006-10-16 21:55:25 · answer #3 · answered by clowdy4 4 · 0⤊ 0⤋