I can't use tacs(they bend) and I am afraid to use anchors because the plaster might crack.
2006-10-14 13:46:53 · 6 answers · asked by Lisa A 2 in Home & Garden ➔ Decorating & Remodeling
I have successfully drilled into plaster without damaging the plaster by putting masking tape over the place where I am going to drill.
2006-10-14 14:07:50 · answer #1 · answered by porkchop 5 · 1⤊ 0⤋
Is there molding at the top of the wall where it joins the ceiling? If so,you can hang the pictures from a wire looped over a nail or hook installed in the molding. I think this was one of the original purposes for the molding which used to be called picture molding.
2006-10-14 22:14:04 · answer #2 · answered by jidwg 6 · 0⤊ 0⤋
Maybe give 3M Command Adhesive hooks a shot, I've had them on painted walls and no damage? They can hold up to like 10 pounds depending what size you get.
2006-10-14 20:49:53 · answer #3 · answered by Anonymous · 0⤊ 0⤋
tape and drill is the answer : ) and 4 brick fireplaces, use small wood pieces with a nail in the wood.. and stick the wood between the grooves in the brick ..
2006-10-14 21:17:41 · answer #4 · answered by Anonymous · 0⤊ 0⤋
If you definately decided you don't want to drill holes and use an anchor, try 3M adhesive picture hangers.
http://solutions.3m.com/wps/portal/3M/en_US/Command/home/us_en/products/picture_hangers/
2006-10-14 20:51:13 · answer #5 · answered by Use another Nickname 2 · 0⤊ 0⤋
Maybe you could use tape.
2006-10-14 20:49:12 · answer #6 · answered by hendricksfamily 1 · 0⤊ 0⤋