Does anybody have any tips
2006-10-14 03:48:54 · 4 answers · asked by freesia2water 2 in Home & Garden ➔ Decorating & Remodeling
Assuming you have a sharp cutter head and you keep firm even pressure through out the scoring process, you shouldn't have a problem.
There is a little gadget built into most tile cutters that lets you snap the tile right on the cutter. You just press down.
2006-10-14 05:13:22 · answer #1 · answered by oil field trash 7 · 0⤊ 0⤋
Take the cut tile to the edge of a work top or table with the cut section over the edge. Press hard with confidence and it should break clean. Some tile cutters have a feature on it for doing the 'snap' - read the instructions............... good luck.
2006-10-14 03:54:59 · answer #2 · answered by thomasrobinsonantonio 7 · 0⤊ 0⤋
What kind of tile are you working with? If it's some type of vinyl tile, heating it before you score and snap it will do the trick.
2006-10-14 04:31:51 · answer #3 · answered by professor grey 7 · 0⤊ 0⤋
rent or buy a wet saw. they work much better, and you can buy a cheap one for less that $100. if you only need it for a short time, you can probably rent on for half that.
2006-10-14 03:53:33 · answer #4 · answered by forjj 5 · 0⤊ 0⤋