no picture comes on it just clicks on then off
2006-10-13 19:14:50 · 8 answers · asked by Anonymous in Consumer Electronics ➔ TVs
it does the same w/ remote and manual button
2006-10-13 19:16:58 · update #1
You should seriously think why you are such a TurnOff.
Seriously look up the manual. if it is still in the warranty period get the dealer to trouble shoot it for you.
I had this problem with my Akai TV but if you let power off for a minute or two and tried again it used to come on. ( We exchanged it
when there was a festival offer )
2006-10-13 19:21:35 · answer #1 · answered by jaco 3 · 0⤊ 1⤋
My word what a bunch of idiots that have answered so far like " maybe its broke " . First warranty does not cover accidental nor deliberate damage so lets look at your problem ! I have been in TV repairs 45 years so that means that I have seen quite a few ! The first thing that suffers with a set getting a heavy blow or being dropped is that the heaviest component in the set apart from the pic tube is the eht transformer , this will try to tear loose from the circuit board , the idea then is to examine where it is soldered in hopefully you will find that all it needs is re soldering or maybe a crack in the circuit board which can be repaired. Maybe get a friend to help who is handy with a screw driver and a soldering iron !!! Cheers Pete
2006-10-13 21:12:17 · answer #2 · answered by Realist 2006 6 · 2⤊ 0⤋
Realist is precise.
Situations like this I go for the cold joints first, but that calls for keen eyesight and of course you must know where to start, if not you waste hell of a time.
EHT or flyback as we call it here, is the first choice, if there are no cold joints to solder, I will also look for cracked PCB, this you must also have keen eyesight, because it normally breaks a few circuit whereby you have to find them out and find ways to connect them and also strengthen back the cracked PCB to prevent it from further damage.
One major tip, if you find that you need to unhook or remove the flyback, EHT, in order to work on the PCB, it has to be earthed to release that powerful static electricity.
If you do not know this simple step, I advice you find a competent technician, I won't teach you how to do it here because if you are not careful or did it wrongly, it might paralyze you for a few months if it is severe enough.
Hope you can enjoy back your favorite TV shows
2006-10-13 21:40:10 · answer #3 · answered by davmanx 4 · 0⤊ 1⤋
OK if the TV never turns on then its a fail safe.
its needs some repair work. if i remember correctly it would be the H.O.T. Horizontal output transistor.
depending on the size and current cost of a replacement TV, it might be cheaper to buy a new TV. but you can call repair places to see if they will give you an estimate on how much it would cost to repair it.
2006-10-13 19:21:43 · answer #4 · answered by ? 2 · 1⤊ 0⤋
Circuit breaker is probably kicking on a short. got to get it diagnosed, if it's worth it. If not, buy a new one.
2006-10-13 19:28:17 · answer #5 · answered by Anonymous · 0⤊ 1⤋
return it to the store or call a friend
2006-10-13 19:19:47 · answer #6 · answered by Steven 1 · 0⤊ 1⤋
the on button is stuffed
2006-10-13 19:23:37 · answer #7 · answered by karl t 2 · 0⤊ 1⤋
mabey you broke it.
2006-10-13 19:18:04 · answer #8 · answered by CHUCK NORRIS. 2 · 0⤊ 2⤋