I am looking to buy a TC Encore and I am interested in buying used barrels to help with the cost. Any one know where I can find these reasonably?
Also I got a quote a brand new TC Encore Frame with buttstock and forestock for $252 is this a good price?
2006-10-09 13:03:58 · 0 answers · asked by Heythere 3 in Sports ➔ Outdoor Recreation ➔ Hunting
For a new one, $252 is a very good price, how good depends on which you're getting SS/Blue/Synthetic...There is a very nice used one on http://www.gunbroker.com for $199.99(synthetic). GB would be a good place to check for TC barrels also, there were hundreds up for sale...Another good site to check is http://www.gunsamerica.com
2006-10-09 15:06:27 · answer #1 · answered by jack 7 · 0⤊ 0⤋
Encore Barrels For Sale
2016-10-07 05:36:00 · answer #2 · answered by ? 4 · 0⤊ 0⤋
For the best answers, search on this site https://shorturl.im/awOlK
It depends, I have an Encore that shifted zero slightly when changing from barrel to barrel. Each barrel has it's own scope so it had nothing to due with swapping scopes back and forth. I looked around on several websites to see if this was normal and found my answer. I marked the pin and frame with a permanent marker and swapped barrels back and forth, as long as I put the pin back and lined up the marks I had no shift in my zero....when I misaligned the marks on purpose I did hava a slight shift. Why? I can't tell you, I just know it worked for me. I made my marks permanent with a small traingular file by filing some small marks in the frame and pin so that I can align them everytime. Also check the link below to see PR Bullets fix for the same thing.
2016-04-09 03:46:44 · answer #3 · answered by Anonymous · 0⤊ 0⤋
Since the Encore has the scope mounted on the barrel and it comes off with the barrel when you change barrels it should not change zero. Since you are experiencing a change of zero when you change barrels, it sounds to me as if you have a loose mount or the scope is not firmly held in the mount. This would allow the scope to move when you remove the barrel from the frame to replace it with another barrel. Check your scope and mounts to see if they are loose. Another possible problem could accur if you allow oil to get between the rings and the scope. If you apply too much oil to the barrel prior to storing it, the oil will do what oil is designed to do and lubricate the inside of the rings which can allow the scope to move. All of this assumes that you have a separate scope mounted on each barrel. If you are moving your scope from barrel to barrel as you change barrels then that is your problem right there. Each time the scope is removed and replaced on another mount, it will need to be rezeroed. This is not only because the likelyhood of having the scope fit in the new mounts exactly as it did before, but also because the new barrel will shoot to a different zero. Hope this helps.
2016-03-19 01:53:41 · answer #4 · answered by Anonymous · 0⤊ 0⤋
I've seen them on Ebay and Gunbroker.com
2006-10-09 15:17:37 · answer #5 · answered by Yash 2 · 0⤊ 0⤋