remove all handles and knobs,what you cant remove tape up ,use a light grade sandpaper,the smaller the number the coarser the paper,eg 60 is coarse 120 is fine
you can buy a product called ESP, its an etching primer,and ensures max adhesion,you apply this by cloth and wipe off after 90 Min's,its clear and you don't got to mask or tape up for this.you can now use any paint but it will only be knock about hard after a week,but dry in normal time.
or you can use the specified ronseal but may find you restricted in colors
when painting the doors or the carcases,that's the press,paint the edges first but only do 1 at a time, and then the larger areas.when you paint the large area,Lay the aint off in the direction of the wood grain,laying off is to use the brush lightly in the longest direction,which is generally the direction of the grain.The quicker you paint the better the finish,don't be in a hurry to get at the paint good preparation is the recipe for a good result.happy painting,i,v had good result with both ways
2006-10-06 22:09:16
·
answer #1
·
answered by yellowdog 2
·
1⤊
0⤋
Paint For Kitchen Cupboards
2016-12-14 10:44:49
·
answer #2
·
answered by hinokawa 4
·
0⤊
0⤋
Ronseal Cupboard Paint
2016-10-04 05:23:47
·
answer #3
·
answered by ? 4
·
0⤊
0⤋
It's pretty important to use a primer coat, particularly if they have not been painted before. It will seal the wood, and allow your new paint to cover well. Otherwise, it may take many, many coats of paint to get the coverage you want. It's also important to sand them before you put on your primer coat. You don't have to do a lot, just go over them once, enough to slighly roughen the surface, with maybe about a 150-200 grit. After you've primed and sealed the surface, get a paint that is designated for kitchen and bath. It should have a hard, gloss surface, one that can be cleaned easily and will repel rather than absorb. Any home improvement store such as Lowes or Home Depot carry them, and they can be tinted to any color you like, even custom colors offered by other paint brands.
2016-03-28 00:39:11
·
answer #4
·
answered by Anonymous
·
0⤊
0⤋
For a kitchen to look professionally fitted, it requires extra preparation. Remove doors, put a marker on each door to indicate where it came from. Wash out carcase with washing soda solutioin, rinse well.
Buy 4" foam roller and small brush,roll on undercoat, this blanks-out previous color.
If color still showing through, apply another one..
Apply finishing coat, don't use gloss, it looks crap., use silk/satin
Paint all doors inside & out, be careful of hinges,
When dry, replace doors.
Dont use strong colors, magnolia seems to be the one that professionals use.
Finally. By using undercoat you achieve a dense finish, which is not possible with a one-coat type paint.
2006-10-06 21:54:53
·
answer #5
·
answered by xenon 6
·
0⤊
0⤋
Make certain you know what kind of paint the original is; if the original was an oil-based paint, no Latex paint will stick for long (that is often the cause of chipping); you'll need to use another oil-based paint.
2006-10-06 21:44:30
·
answer #6
·
answered by silvercomet 6
·
0⤊
0⤋
first--wash them with a strong solution of tsp & water (wear rubber gloves)tsp is found at most paint stores/ dept's. then rinse it with clear water & let dry. if your cupboards are melamine--then buy a good quality melamine primer. if they are a polyeurythaned wood--then ya probably will have to give them a light sanding before you prime them with a good quality suitable primer. hunt around for a good strong kitchen & bath paint. just remember--you get what you pay for. if you can't afford the best--then go for the next best.just don't go for the cheapest. After all your hard work, you'll want it to last
& yes--be sure to remove your cupboards &n drawers from their hinges & sliders & lay them flat to paint them : )
and take the knobs off
2006-10-06 21:53:05
·
answer #7
·
answered by cheezy 6
·
2⤊
0⤋
Prepare your surface well, I found spraying gives the best result !
But you have to take the doors off and spray outside !
Brilliant result with specialist paint !
2006-10-06 21:44:50
·
answer #8
·
answered by Anonymous
·
0⤊
0⤋
Try Ronseal paint and grain, its gives a real effective look . Also they do it in a variety of colours. I have used it on Doors Wardrobes its brilliant
2006-10-08 06:45:13
·
answer #9
·
answered by textkitten 3
·
0⤊
0⤋
There were so many woodworking plans with this collection and you will not believe this but there are over thousands plans in the one package deal. Go here https://tr.im/79slO
This is really something to find that many all together. For someone like me who is just really starting to get involved with woodworking this was like letting me loose in a candy store and telling me I could have anything I wanted. That was my dream when I was a kid.
2016-05-02 00:35:51
·
answer #10
·
answered by ? 3
·
0⤊
0⤋