2006-10-01 15:10:37 · 11 answers · asked by jonathan g 1 in Education & Reference ➔ Other - Education
measure the diameter and divide by 2.
2006-10-01 15:11:39 · answer #1 · answered by leannainpa 3 · 0⤊ 0⤋
your are trying to find the radius of the table. It extends from the center to edge of the table. You should find lenght of the table. Then you find the middle of what the lenght is. mark the that spot. then measure the middle the end of the table.
Radius
The distance from the center of a circle to its perimeter, or from the center of a sphere to its surface. The radius is equal to half the diameter
2006-10-01 22:40:32 · answer #2 · answered by Ian W 2 · 0⤊ 0⤋
Know the diameter (measure across the table), half of that is your radius, your radius should take you to your center point. Think I remember right.
2006-10-01 22:38:59 · answer #3 · answered by Will Try 2 · 0⤊ 0⤋
I'd take a tape measure and stretch it from edge to edge and mark the center of the tape. Repeat the measuring in two other places, marking the center each time. Each time you measure, you should get closer to true center.
2006-10-01 22:19:52 · answer #4 · answered by Mmerobin 6 · 0⤊ 0⤋
Draw a straight line from one point on the circle to another point on the circle.
Draw another like PERPENDICULAR to that line (use a T-square).
Repeat the process using another pair of lines.
The point where the two perpendicular lines cross is the center of the circle.
2006-10-01 22:19:01 · answer #5 · answered by Jay 6 · 0⤊ 0⤋
use three lines. The quickest way is to use a yard stick and make a triangle in the middle of the table. If you don.t want to be too Persis.
2006-10-01 22:15:11 · answer #6 · answered by shoot.bang 3 · 0⤊ 0⤋
2 intersecting lines through the table both laid at the widest point and intersecting at 90 degree angles
2006-10-01 22:14:24 · answer #7 · answered by riksolo 3 · 0⤊ 0⤋
Measure total width and dived by 2.
2006-10-01 22:11:59 · answer #8 · answered by TriSec 3 · 0⤊ 0⤋
Make a fit to scale right angle with a pencil and a ruler.
2006-10-01 22:12:38 · answer #9 · answered by Anonymous · 0⤊ 0⤋
Find the diameter, divide by two.
2006-10-01 22:11:40 · answer #10 · answered by serpagon 3 · 0⤊ 0⤋