My Sony TV model # KV-35V36 has no picture, but the sound works fine anyone know why or how to fix it?

Answer 1

its faulty old son, may be frame collapse, turn brightness up full as you can if theres a bright line across center dont use it until repaired, also could be heaters are out ,but sound and no pic is normaly a job for engineer

Answer 2

Has the set been dropped or in the different case bodily mishanded, or possibly a accessible surge because the finest time it functioned regularly? It sounds like inner circuitry has been damaged. See the links lower than for some innovations on what it might want to correctly be. Printing out that list and taking it to Sony (if that's lower than assure) alongside with the television, and/or taking it to a television restoration save on your region might want to be the subsequent step. might want to you edit your question and include no matter if any LED's flash? From the link lower than: IST OF FAULT indicators * Arching * No image. * defective E/W. unusual noise from PSU. * Distorted image. (provider information for SONY - KV32DX30U) * Line output transistor fails again and again. * No image. LED blinks 5 cases. * does no longer activate. LED blinks 2 cases. * Line tearing. * mistakes codes. (KV32DX30U / SONY restoration tip) * Squealing from PSU. * enter provider mode. * mistakes codes. * LED blinks 2 cases. (tip for KV32DX30U SONY) * Tripping. * Switches to standby. (after commence-up ) * No applications. * No applications. * Intermittent width version. * Pincushion distortion. * Intermittently differences channels and does no longer stay in standby. * Noise from P/S. Standby LED flashes. * does no longer replace channels till menu button is pressed first. * lifeless. * stuck in standby. * the thanks to re-initialise the NV ram. * component ratio button locks up.

Answer 3

warrenty claim can help u or take it to sonys cutomer service center

Answer 4

is your cable hooked up correctly you may have also may have blown your picture tube