I have tried connecting a SCAT output from a freeview digibox to the S-VHS but it doesn't work.
2006-09-30 08:16:07 · 5 answers · asked by Chris F 1 in Consumer Electronics ➔ Home Theater
Check the remote and read the manual that comes with your projector. There is probably a tv/video type switch on the remote but it isn't always called that. There are so many options on these projectors that you need a bachelors in science just to use the remote.
2006-09-30 09:08:44 · answer #1 · answered by grhero 1 · 0⤊ 0⤋
If by data projector you mean a front projector used for business presentations with, for example, Powerpoint, simply consider it to be a diplay unit like a TV monitor without a TV tuner. You can use cable box or satellite receiver as a program source, or a computer TV card connected via the S-video (not S-VHS) or composite connections.
2006-09-30 09:25:22 · answer #2 · answered by agb90spruce 7 · 0⤊ 0⤋
Composite video is carried via scart, on pin 19 if you're interested, but not S-Video. As an aside, S-VHS refers to an extended quality VHS recording process. You should be able to get a cheap scart adaptor that will give you composite video output from your freeview box, but make sure you get one in the right direction, i.e. OUT of the freeview box. Some adaptors have a switch on them to select IN or OUT, others have both IN and OUT wired, but most are either IN or OUT, so beware. Any good sized tv shop should sell them, or there are countless places online. Try www.cpc.co.uk for example. You should be able to plug the composite video straight into your projector without any troubles.
2006-10-01 01:27:45 · answer #3 · answered by Anonymous · 0⤊ 0⤋
Sounds like an older projector. You will need something to covert the video signal to s-vhs or component. A higher quality VCR or receiver will do that (pluge the cable into the VCR, then the component out to the projector.
I assume that since you called it a data projector, it has VGA. For less than $75, they make a TV card for your PC. You could take a cable feed into your PC, then send it out VGA to the projector.
2006-09-30 09:17:05 · answer #4 · answered by jumping_in_101 3 · 0⤊ 0⤋
Your PS3 must have include a cable that outputs to yellow, red and white RCA. in simple terms use the yellow RCA to plug into the projector. you would possibly want to then plug the red and white RCA right into a receiver for audio.
2016-12-04 01:48:43 · answer #5 · answered by thorpe 4 · 0⤊ 0⤋