Where can I find the Codes to reprogram the keyless entry
2006-09-29 00:25:28 · 6 answers · asked by dave091125 2 in Cars & Transportation ➔ Car Makes ➔ Ford
You'll have to go to Ford with this one. Might have to have your log book with you.
2006-09-29 09:21:37 · answer #1 · answered by sabbyt 2 · 0⤊ 0⤋
Josh is wrong on the keyless code placement... Only place other than the card that came with the vehicle is on the module on right side wall right behind second seating and either reqires the panel to be removed or the code learned from the module using a scan tool.
You can't change the code, only way to change the code is to change the module.
You can add a secondary code to the original and that's in the owners manual ..don't have one? here Download one here:
https://www.fleet.ford.com/maintenance/owners_manuals/default.asp
and if it's the key fob (one that goes on your key chain) it's in there also...
But beware, this only works if the keypad is one that came with the vehicle... Ford has one in the aftermarket that sticks on the body of the vehicle... If you don't have the card, you are (blank) out of luck...
2006-09-29 23:55:43 · answer #2 · answered by gearbox 7 · 0⤊ 0⤋
Look for a 5 digit numbers on a sticker on the rear hatch hinges and if you know where the module is in the left rear of the truck you will find it there as well
2006-09-29 22:55:27 · answer #3 · answered by Josh S 7 · 0⤊ 0⤋
have to ck with a Ford Dealer
2006-09-29 07:36:08 · answer #4 · answered by R W 6 · 0⤊ 0⤋
you haft to retrive them from the ecm with lab top.. if you know someone at the ford garage!!! if not call the dealer for info.
2006-10-03 20:23:19 · answer #5 · answered by aaron m 1 · 0⤊ 0⤋
It should be in your clove box with you explorer manual.
2006-10-03 20:52:31 · answer #6 · answered by George K 6 · 0⤊ 0⤋