2006-09-28 12:25:37 · 10 answers · asked by zepfan12 2 in Home & Garden ➔ Maintenance & Repairs
Naval Jelly is good if you're not worried about loosing the chrome or any finish on it, but keep it off your skin; or get oil (cooking oil, machine oil, light motor oil, etc) and soft cloth and rub it back to shiny; or take a dremel-like tool, a polishing tip and some compound and work on it with that.
2006-09-28 16:02:01 · answer #1 · answered by akulian53 2 · 0⤊ 0⤋
Apply naval jelly. Let sit for a while, then wipe off. Scrub a bit with fine sand paper.
Then apply WD 40. Use a stiff wire brush, tooth picks, cotton swabs, more naval jelly if necessary.
Then oil with gun oil, just a drop or two at the hinge, a drop each side of the blade.
2006-09-28 19:29:41 · answer #2 · answered by Anonymous · 1⤊ 0⤋
steel wool and 3 in i oil or rust remover.
2006-09-28 19:28:45 · answer #3 · answered by smooverman2 1 · 0⤊ 0⤋
Naval jelly, available at hardware stores.
2006-09-28 19:27:03 · answer #4 · answered by Elizabeth L 5 · 0⤊ 0⤋
1 Can of DW40 seat it in a bowl spray and let soak
2006-09-28 19:41:05 · answer #5 · answered by Anonymous · 0⤊ 0⤋
If they still sell naval jelly, it works great!
2006-09-28 19:31:52 · answer #6 · answered by Papa John 6 · 0⤊ 0⤋
scrub with steel wool
2006-09-28 19:27:18 · answer #7 · answered by Anonymous · 0⤊ 0⤋
steel wool and elbow grease
2006-09-28 19:27:46 · answer #8 · answered by mobileminiatures 5 · 0⤊ 0⤋
bush it with toothpaste. it may take a little while but is a cheep method.
2006-09-28 19:35:40 · answer #9 · answered by little momma 2 · 0⤊ 0⤋
CLR
2006-09-28 19:27:39 · answer #10 · answered by Anonymous · 0⤊ 0⤋