What is a print spooler? This is stopping me from installing software.?

Question

I'm trying to install printer software, but it is stopped by "print spooler". Options availlable are: "fix" or "fix all". Neither gives me a result.

Answer 1

A Memory Cache Either Set Up Virtually On Your Hard Drive or actually on your motherboard(In The internal Modem Usually), To Send Emails In The Format That Your Internet Runs On (Dial Up, Dsl, Cable) Basically It Delivers It To Your modem or Server in the format that it gets transmitted as.

A PRINT Spooler is the same but for any given printer installed. (It's Possible That The Spooler Location Has Been Changed Or Deleted.)

Have You Actually Printed Anything since you started having problems installing software?.
Try This Then If You Can't Print, Then Reinstall The Printer Via Printer Setup Wizard In Control Panel Or Completely Remove All Printers from your available printers list and then try the software.

(From The Option "Fix" etc, it looks like the things I'm Getting At Are What's Going On.)

Answer 2

A print spooler is a little program that takes the information from the programs trying to ptint something and stores that information in a spool (a portion of computer memory used to store informations that will be transmitted to the printer).
After the program in which you print something generates the information for the printer, it transmits it to the spooler so the program can continue to run. The spooler works with the printer and transmits data to it at a rate it can accept.
If you are trying to install a new printer, use the "Add printer" wizard in the "Printers" folder, not the setup program on the installation disk.

Answer 3

Hi, the print spooler is a service in the windows operating system. The error that it is giving you might depend on a lot of things
1. go to control panel, administrative tools, services (if you have xp) then check if the print spooler service is started if not right click on it and start it. then try to install the software again. If that doesn't work

2. insert the windows xp installation cd in the cd drive go to the run command just above the start button and type sfc /scannow a scan will begin (it will slow your computer a bit so you shouldn't use your computer while it's scanning) this utility repairs all the system files in windows that have been corrupted or are not working properly.

Hope it helps :)

Answer 4

The print spooler is a program that co-ordinates sending files to the printer. If you don't have a printer currently attached, maybe it is trying to 'spool' a print job to a non-existent printer? Have you got a little picture of a printer in the bottom right corner? If you have, click on it and see if you have any print jobs waiting to be sent. You may need to cancel them (from the 'document' menu bar option in the window that opens when you click on the printer icon). If you haven't, sorry I don't know.

Answer 5

try this maybe it will fix your error:

http://registrysmart.com/

Print spooler it is a program that stores documents to be printed on the hard drive, thereby freeing the memory up and allowing other functions to be performed while printing goes on in the background.

Answer 6

Spooling is the process that loads all pages into one document to be printed at once. Unless your computer is not compatible it would become an option in preferences. Check your doc's for system requirements.

Answer 7

flow to start up / Run and attraction in "facilities.msc" without citation marks, then press enter or click ok. contained in the window that opens (facilities) search for "Print Spooler" on the right perfect-click "Print Spooler" and choose "homes". click on the "restore" tab and adjust all 3 drop-down bins to "Restart The service". make certain both textual content bins below say "a million" in them. click ok till you're again on the facilities window, close it and also you're sturdy to flow. flow again into the houses of the "Print Spooler" tab and be particular to click start up to restart the Print Spooler service and it is going to restart the service on the on the spot. The Print spooler relies upon on the distant technique call (RPC) service. is this service disabled? flow to facilities.msc search for RPC. examine state: automated