Use a peice of wire or 4 nails (one in each hole). It is simple to do!
2006-09-26 14:39:14
·
answer #1
·
answered by fire4511 7
·
1⤊
0⤋
Make u shaped loops out of welding rod small enough to fit the holes there are spring plates you have to catch and bend toward the radio to release the unit from the dash. If you are going to toss the old deck tear off the face plate and use screwdriver to push one spring plate at a time. Then pry out.
2006-09-26 13:30:55
·
answer #2
·
answered by John Paul 7
·
0⤊
0⤋
I found a cheap way to get my old ford deck was to use a old wire coat hanger.Just cut and bent it till it lines up in the holes.Then insert, press and pull should come right out!
2006-09-26 13:52:37
·
answer #3
·
answered by italianpanther7 4
·
0⤊
0⤋
a large one hundred twenty 3 hundred and sixty 5 days previous solid iron skillet @Corrie: You were ripped off. i purchased 10 vanilla beans for $9 very last week. in no way purchase them contained in the save as they are frequently contracted up and they have a tendency to be overestimated. Get them on-line. i'm getting them from beanilla.
2016-12-02 03:23:21
·
answer #4
·
answered by walley 3
·
0⤊
0⤋
I used 4 small allen wrenches. where the wrench bends over its easier to hold onto when pulling the deck out
2006-09-28 18:38:02
·
answer #5
·
answered by stu 2
·
0⤊
0⤋
If U are talking about the radio ETC.A coat hanger - works good - Just cut 2 pieces off & bend in a U & stick then in the holes - AMAZING !!!
2006-09-26 13:26:25
·
answer #6
·
answered by Anonymous
·
0⤊
0⤋
The tools are only a few bucks and are at Wal-Mart.
2006-09-26 14:09:20
·
answer #7
·
answered by Anonymous
·
0⤊
0⤋
leave your window open i`m sure some scally will remove it for you..for free..
2006-09-26 15:09:03
·
answer #8
·
answered by Anonymous
·
0⤊
0⤋
saw
2006-09-26 13:22:43
·
answer #9
·
answered by TheAllKnowingFizz 2
·
0⤊
1⤋
with difficulty
2006-09-26 21:41:11
·
answer #10
·
answered by Anonymous
·
0⤊
0⤋