How can I use two network interface cards in same CPU for NAT?

Question

I heard that it requires little modification in registery setting. what is that?

Answer 1

Registry, if done properly, you shouldn't bother, the software doing NAT work would do that adjustment for you in installation, there is no problem in you using any number of cards in one machine; Windows already recognized that, just put the cards in properly as if they are new, by buying cards of different manufacturer you can save a lot of problem later on since you won't get confused.

There are almost no full-blown NAT suite on shelf of software stores, perhaps you want a proxy? Although Microsoft Proxy Server did quite automatic and complete NAT job itself for Windows, Linux has built-in kernel IP Masquerading. Apache can run in a very simplistic HTTP proxy mode instead of Web server mode.

Answer 2

it really is conceivable to examine a on the spot router with a on the spot connection. Have done it various circumstances. you employ the router base address contained in the browser to log in and make the ameliorations. till someone deliberately bumped off the NIC from a table good to position in a on the spot card, there must be a connection. search for a telephone like connector it somewhat is larger. On a computer there is from time to time a small door that drops down on the again. some have a small slide window on the area. propose putting the on the spot channel to 11, use MAC filtering or WEP for safe practices, change the login password, and turn off the SSID broadcast after each little thing else is determined.

Answer 3

Try searching for connection bridging. Linking the 2 would be called a bridge, and yes might require a ergistry tweak.