Looking for the best finish for a broken plate mosaic coffe table project that isnt expensive and can at least cover over the sharp edges.
2006-09-25 13:25:39 · 6 answers · asked by tricky k 2 in Home & Garden ➔ Do It Yourself (DIY)
A poured-on epoxy finish. Be prepared to do this in an area with excellent ventilation but no chance of bugs, dust or lint landing on the drying epoxy.
If your table doesn't have raised edges, you might have to build a "form" for the edges - so the epoxy doesn't run off the sides. Hopefully the product will have some suggestions for non-stick materials to use.
2006-09-25 13:41:53 · answer #1 · answered by lazykins 4 · 1⤊ 0⤋
Most likely the cheapest way is to use a watered-down clear glue, then coat the glue thinly with a silicone-type caulk the clear kind, so that if it gets wet, it wont make stuff sticky . Don't put it too thick or it will become cloudy, and unless it's a mostly white mosaic, the colors will be washed out- looking.
2006-09-25 13:36:42 · answer #2 · answered by Myrriah 2 · 0⤊ 0⤋
Have you thought about using a sealer that is used for ceramic? Go to large hardware store like HomeDepot or Lowes and ask for the sealer used for ceramic tile.
2006-09-25 13:40:37 · answer #3 · answered by sharon g 2 · 0⤊ 0⤋
Many restaurants have pictures encased in a clear finish for the table top. I think this is a product that is applied from a can. i would check hardware and paint stores for it.
2006-09-25 14:18:24 · answer #4 · answered by T C 6 · 0⤊ 0⤋
"James Dean" - Eagles "Bela Lugosi's ineffective" - Bauhaus "Bette Davis Eyes" - Kim Carnes "bypass The Wine (Sophia Loren)" - The Rolling Stones "Roy Rogers" - Elton John "Candle in the Wind" - Elton John (so long Norma Jean , aka Marilyn Monroe) "Clint Eastwood" - Gorillaz "Rosanna" - Toto replaced into written approximately Rosanna Arquette "you're In My heart" - Rod Stewart is approximately actress Britt Ecklund "guy on the Moon" - R.E.M. (Andy Kauffman) BQ3 - Robert DeNiro - Cape concern
2016-12-12 15:07:07 · answer #5 · answered by spadafora 4 · 0⤊ 0⤋
i kno i kno i kno make one
2006-09-25 13:28:09 · answer #6 · answered by candi_luver133 2 · 0⤊ 1⤋