Would the light get to much ice over it to be effective?
2006-09-25 10:00:50
·
answer #1
·
answered by Parrot Bay 4
·
0⤊
0⤋
just one of those curious things huh...
There is a reason why you don't put a standard bulb (normal tungsten filament) in an environment below freezing. When the switch that activates the current to the bulb is quickly sprung by opening the freezer door, the rapid heating of the filament would cause it to break very frequently, more so than with the less colder temperatures found in the lower compartment. newer technology in the used of LED type lights or non tungsten filaments have probably eliminated this problem.
2006-09-26 02:36:07
·
answer #2
·
answered by centurion613 3
·
0⤊
0⤋
my freezer and refrigerator both have lights, I'm thinking thou most freezers get too cold and may have a tendency to break or even short circuit the bulb because of dripping water
2006-09-25 16:20:19
·
answer #3
·
answered by jvg49er 6
·
0⤊
0⤋
My freezer has a light. Yours might be an older version.
2006-09-25 16:17:51
·
answer #4
·
answered by Anonymous
·
0⤊
0⤋
A lot of new freezers do have lights in them. One of our fridges does, and the other one doesn't. I have no idea as to why, though.
2006-09-25 16:13:09
·
answer #5
·
answered by Anonymous
·
0⤊
0⤋
Because it's so cold in the freezer, the photons condense out of the air and fall as frost.
2006-09-25 16:53:35
·
answer #6
·
answered by rainfingers 4
·
0⤊
2⤋
lights in freezers may produce heat which melts the ice....
2006-09-25 16:19:15
·
answer #7
·
answered by tubs 1
·
0⤊
0⤋
good question, call Lowes, or Home depot, and see what they tell you...
2006-09-25 16:13:52
·
answer #8
·
answered by hugabug72 3
·
0⤊
0⤋
cause is cold dir
2006-09-27 18:07:51
·
answer #9
·
answered by maddy 2
·
0⤊
0⤋