English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

is there anything i can do to clean the old oil out and clean the inside of the engine out or is it knackered?

2006-09-25 08:24:49 · 14 answers · asked by Anonymous in Cars & Transportation Maintenance & Repairs

14 answers

Look at the dipstick. If the oil on it is clean then muck on the filler cap is due to condensation of moisture due to only going for short runs. The water never gets hot enough to evaporate.
Look inside the valve cover, this is usually clean. Wipe the cap clean and check the hose from the valve cover to the air intake/cleaner to see it is clear.
This happens more on old engines with more blow by past the pistons.
If it's got in this state due to wear whatever you do it will come back and cleaning it out is a waste of money.
RoyS

2006-09-25 10:26:31 · answer #1 · answered by Anonymous · 0 0

I dont like the sound of filled the oil up.
Sounds like an oil burner, worn cylinder bores and piston rings allowing oil up past the rings where it produces carbon deposits and the blow by allowing the resulting carbon to contaminate the engine oil. I you have topped up the oil try 20 miles or so at 70 on a motorway/dual carriageway, get the engine hot, then stop at a convenient place and see if the gooey mess has disappeared, often oil gets emulsified if the engine does not reach normal operating temperature, and will magically disappear, as will a couple of pints of water leading to a dramatic drop in oil level !
Best thing is to change the Oil and the Filter using a good quality non synthetic oil like GTX,
It is a good idea to clean it up if you are a DIYer, use a flushing oil etc but drain the oil with the engine hot, not good health and safety advice but ithe hotter the more contaminents you will drain with the oil howeve the black will come back, basic problem is failing to change the oil often enough.
Fords often suffer from worn camshafts, leading to a drop in performance nor helped by not changing the oil often enough
so I guess you probably need a recon engine and in future change the oil every 6 months.

2006-09-25 11:18:31 · answer #2 · answered by "Call me Dave" 5 · 0 0

As oil heats up some will evaporate, and then settle at the top point of the engine, which is the cap. Thats all this is, nothing to worry about. If its a creamy colour though check the rest of the oil is black still. If so this will clear, its just a little water vapour reacting with the oil, however if all your oil turns creamy, thats the only time to worry.

2006-09-25 11:06:32 · answer #3 · answered by Bealzebub 4 · 0 0

its an escort isnt it? its got the black death.. your engine needs to be flushed. basically its old carburised oil, which gets pumped up from teh oil pump scavenger, and settles out in the rocker box.

remove the cover, its got a rubber gasket so it wont need replacing. (or it shouldnt) and dunk the whole tin cover into a big plastic tub, and fill it with hot soapy water.. and scrub it out..

(we get them steamcleaned ) then after replacing it, drain out half the old oil, and add a pint ot two of parrafin or diesel (DONT USE ANY OTHER FUEL.) run your motor for 20 minutes, drive a mile or two around the block, draiin it and refil with fresh oil...

older fords do this... but ive seen them like boot polish, and they still ran ok..

good luck. and to get it off youll need a 10mm 12mm and a phillips screwdriver.

2006-09-25 08:42:36 · answer #4 · answered by Anonymous · 0 0

Its unanimous,if the quantity is small it is condensation, it is wide-spread for water to vaporize and combine with oil vapors and come to a decision chilly metallic the place it recondeses right into a stable or your white stuff. The longterm storage allowed an inornate quantity of moisture to amass.The treatment is merely to replace the oil and filter out and video exhibit it for variations. If the creamy white or carmel brown colour is in the oil pan/oil then you somewhat certainly have a concern with engine coolant contaminating the engine oil. it is an costly and precise fix to the engine cylinder heads, gaskets, or perhaps the block. desire this information is sensible to you,,,reliable luck collectively with your motor vehicle..

2016-12-12 14:53:10 · answer #5 · answered by ? 4 · 0 0

change the oil put new stuff in.Run engine for about 200 miles then change the oil again and it will clean the inside of the engine.

2006-09-25 08:30:03 · answer #6 · answered by Anonymous · 0 0

Not knackered, need to get engine flush.Put it in run it and empty it and put new oil in

2006-09-25 08:27:40 · answer #7 · answered by Anonymous · 0 0

first off how old is your car and what make is it?if there is goo inside it could be water in the engine.you will have to flush the engine out and refill with new oil.this can be done easily by yourself but you just as well pay a garage to do it.

2006-09-25 08:29:08 · answer #8 · answered by Anonymous · 0 0

pretty normal, replace cap or clean. make sure you oils not mixing with you water, should be fine otherwise, it happens because the engine crankcase circulates fumes and oil mist which build up over time.

2006-09-25 08:33:16 · answer #9 · answered by ChrisAds 2 · 0 0

Sounds like you need to change your oil, not just fill it up. Get yourself a Haynes manual :)

2006-09-25 08:28:53 · answer #10 · answered by Andromeda Newton™ 7 · 0 0

fedest.com, questions and answers