In a 2000 Buick Century, how do I remove and replace the factory radio/tape player with a factory CD player?

Question

I can't figure out how to remove the original radio and replace it with a cd unit. I can't figure out what part(s) of the dash have to be removed, and how to do it.

Answer 1

I don't think there is but there may be a couple of screws once you have removed them from the front dash panel it is just snapped in with clips. You should be able to get a good grip and pull it off. It may take a little finesse but it will come off.

For a better view of the situation go here:

http://www.trademotion.com/partlocator/index.cfm?action=getLocator&siteid=213815&chapter=DR1AC97&appSectionid=2610&groupid=4805&subgroupid=37125&componentid=2958&make=4&model=Century&year=2000&graphicID=AC97230&callout=14&catalogid=2

Answer 2

start by removing the fuse panels on the sides of the dash (driver & passenger) there should be a 7mm screw on each side. There may be 2 7 mm screws over the ins cluster. The driver's underdash needs to be removed to get the 2 screws there then the whole piece from driver's side to pass side should unclip.

Answer 3

have you tried cars & transportation ??
there is a category list to the left of page.