2006-09-22 09:25:45 · 3 answers · asked by jdtrimm1975 1 in Cars & Transportation ➔ Car Audio
If it is a factory radio, go to the dealer. If it is an aftermarket radio, and just got installed, the reception will be worse. Really no effective way around it. If it is an aftermarket radio, installed a while ago, it could be a loose connection/ground, or the tuner could be going out.
2006-09-24 00:40:47 · answer #1 · answered by pump_runner 2 · 0⤊ 0⤋
in case you have not have been given an entire function test device which you will show screen gas trims and different PID's you will in all risk be at an advantage taking the motor vehicle in for diagnostics! word; it is had to examine to make certain if the motor vehicle has an early production date or overdue. The sensor has been replaced after July twenty eighth, 2002. the overdue autos use a Zirconium sensor, the early fashions use a Titanium sensor and is not confusing to get blended up via fact the connectors are the same! yet another subject this is elementary in this motor vehicle which will reason this DTC is a ruptured gas tension regulator diaphragm and it will squirt gas suited into # 6 intake runner!
2016-12-18 15:06:09 · answer #2 · answered by ? 4 · 0⤊ 0⤋
i would go to the dealer or a shop and tell them about it ands see what they say, tell them to check the connection to the radio, might have come loose
2006-09-22 20:03:07 · answer #3 · answered by penguin 4 · 0⤊ 0⤋