need to oil my sewing machine but only have wd-40
2006-09-21 19:51:35 · 7 answers · asked by littlerebel65 2 in Consumer Electronics ➔ Other - Electronics
If you are an avid sewer, I suggest not risking your machine over the quick fix. The viscosity of that brand is very different then sewing machine oil. I paid over $200 for my Singer, so using a $1.00 can of WD just isn't good advice.
You need a thicker oil for the Singer, and if you have an warranty on it still, this would likely void it. Take the steps to head to a craft shop, sometimes even Walmart and pick up the oil. It's worth the time and money in the long run. Good luck!
2006-09-21 20:04:19 · answer #1 · answered by Manatee 5 · 0⤊ 0⤋
WD-40 dries up in about a day, it ok for a temporary fix for a day or two,, but get some oil soon. Most grocery stores stock those little cans.
2006-09-21 19:55:32 · answer #2 · answered by Anonymous · 0⤊ 0⤋
Why do people insist on using WD40 as a lubricant. It is not, was never intended, and is not marketed as a lubricant. It is a water displacement product. It will will displace whatever oil is left, and turns anything like rubber belts into soft goo.
Wait until morning and pick up some 3in1 at the hardware store.
2006-09-22 17:45:21 · answer #3 · answered by Aurthor D 4 · 0⤊ 0⤋
It would be fine for a quick fix, but you are better off using a good light machine oil regularly.
2006-09-21 19:56:49 · answer #4 · answered by Anonymous · 0⤊ 0⤋
It will be fine for now, but I would suggest you get some 3 in 0ne because it is a little heavier viscosity
2006-09-21 19:57:44 · answer #5 · answered by whajagonado 2 · 0⤊ 0⤋
Yes, but it is a degreaser not oil. Get some oil soon.
2006-09-21 19:59:04 · answer #6 · answered by harPOON capt uss TANG 2 · 0⤊ 0⤋
Sure
2006-09-21 19:58:45 · answer #7 · answered by Norton N 5 · 0⤊ 0⤋