What buttons do you press to start a 3-way calling? and how do you connect the 2 people you're talking to on the phone?
2006-09-21 17:21:49 · 8 answers · asked by Anonymous in Consumer Electronics ➔ Other - Electronics
You are on the phone with one person, then you click the flash button and should hear a dialtone. Dial the number of the other person you want to talk with. And when they answer click back over and all 3 should be there!
2006-09-21 17:24:33 · answer #1 · answered by Anonymous · 1⤊ 0⤋
How To Have A 3 Way
2016-10-01 11:47:40 · answer #2 · answered by ? 4 · 0⤊ 0⤋
different phones may vary . usually you use the flash button to put the first call on hold a dial tone will come and then you dial the # and push the flash button again. also remember unless you have this service on your phone line there is a per call charge and make sure you do not have a 3 way block in place good luck
2016-03-17 23:53:49 · answer #3 · answered by Anonymous · 0⤊ 0⤋
This way really works. Call your first person. When they answer, hit FLASH and *71 + friends number. Then wait for an answer. Press FLASH again you shall all be talking on the phone together
2014-02-25 10:22:18 · answer #4 · answered by Matt 1 · 0⤊ 0⤋
Trinie,...
First thing, does your home phone service carrier (Land line provider) have 3-way calling, on your line,. if you do then all you need to do is,.. first of all, when you make your fist call , to your friend(s) and you are connected to the fist person,. OK... then inform,. your first party to stay on the line, inform that person they will here a beep and silence for a minute,. tell them just stay on the line.,... Next.. by just pressing on your phone receiver, you will temporarily here a beep also place the call the other persons number, as the the other persons phone rings,.. press on the receiver again,.. and check to see if your first party is on the line with you,. the reason for this is if you wait for the other person to answer , you will cut off the first person you called,.. hope this helps.
2006-09-21 18:25:35 · answer #5 · answered by ric 2 · 0⤊ 0⤋
press flash or talk you'll hear a blinking dial tone dial the number you want wait for it to ring and press flash again and that should do it! good luck
2006-09-21 17:31:06 · answer #6 · answered by Anonymous · 0⤊ 0⤋
You use Your flash bottom that pust one on hold them call the other. Then flash or hook switch for three way calling.
2006-09-21 17:36:58 · answer #7 · answered by canivieu 5 · 0⤊ 0⤋
Call your provider and see if you have that service inluded in your phone plan. They will also tell you how.
2006-09-21 17:24:22 · answer #8 · answered by Anonymous · 0⤊ 0⤋