I tune the tv to channel three, which is where the RF modulator is set. The light on the modulator next to "3" comes on. After a number of seconds the DVD starts playing, for a matter of seconds, and then the connection is lost. This only happens sometimes. Often the DVD won't play at all. What could be the problem?
2006-09-19 13:00:00 · 4 answers · asked by bloomorningglory 7 in Consumer Electronics ➔ TVs
I tried channel 4 and it worked last night such that I watched a whole movie. Today I can't get anything. I will try a new modulator.
2006-09-20 10:59:34 · update #1
New modulator, same deal. :/ Thanks guys!
2006-09-20 13:58:34 · update #2
You need a new TV.
2006-09-19 13:04:11 · answer #1 · answered by sparkles 4 · 0⤊ 0⤋
Does your modulator have an option to view on Channel 4? If so, try that
2006-09-19 13:08:34 · answer #2 · answered by phil_noon 3 · 0⤊ 0⤋
Bad RF modulator. Buy one at radio shack,, try it.. if it works,, you know the old one is bad,, if not return it. sounds like a intermittant connection in a chip/transistor in the RF modulator.
2006-09-20 00:29:00 · answer #3 · answered by Anonymous · 0⤊ 0⤋
Check your coaxies. These are the little plugs that cable is hooked into. The ones you have to screw the plugs on. On an older TV you may have a short.
2006-09-19 13:09:42 · answer #4 · answered by glitz_and_glitter 3 · 0⤊ 0⤋