How to I install track lighting, or do anything with electricity if there is another condo above me? wire?

Question

How do I move the wire around to the places that I need to install lighting, new ceiling fans, etc.?

Answer 1

home centers sell surface mount systems that can de done very nice and require no work above the ceiling

Answer 2

Well, the hard way is to cut holes in the wall and ceiling and fish the line behind the drywall. It's the long term solution and will look the best.

I have seen track lighting that plugs in. The base has a plug that reaches an outlet and you attach the individual light canisters to the base. You can cover the cord with a raceway (cord cover), which can be painted to match your decor. Once painted, it will be less noticeable. Good luck!!

Answer 3

The first thing you can do to save a whole lot of time and trouble is to check with your condo association members, preferably long term owners.
They have been there and done that....they can tell you and maybe even suggest an inexpensive "helper".
Depending on the condo's age and the code where it is built, there could be a number of situations in your ceiling.

Answer 4

it particularly is available, in case you have an attic above the mattress room, and it particularly is perplexing. First come to a variety the area you decide on for on the fan to bypass. Drill a small hollow indoors the ceiling there, and push a stiff precise away piece of twine up into the attic. A twine coat hanger works reliable. Then upward push up indoors the attic and detect the twine. clean out the insulation to exhibit the ceiling sheetrock. hint a metallic ceiling fan container around the area the twine have been given right here by using, and shrink out the hollow. installation some 2x4 bracing, on the subject of the joists, to assist the container and fan. Now the actual relaxing starts off. detect the coolest of the wall above the replace you decide directly to regulate the fan. Drill a a million/2 to 5/8 hollow by using the coolest plates, as close to to direclty above the replace as available. Then kill the circuit that controlls the replace. do away with the canopy and pull the replace as far out of the container as available. do away with between the tabs from the coolest of the container. If it became a 15 amp circuit breaker or fuse controlling the replace, you will decide for 14 gage twine. For a 20 amp breaker, use 12 gage twine. Your going to might desire to fish the twine by using the hollow you made above the replace, down indoors the wall, and into the container the area you purchased rid of the tab. it particularly is somewhat powerful to purchase or borrow a fish tape for this. the various end of the twine will bypass to the container the area you decide on for on the fan. connect white, black and floor(bare twine) to the coolest terminals on the replace. Hook up the fan in accordance to the guidelines that incorporate it. turn the aptitude draw back on, and you will be arranged. in case you haven't any longer have been given an attic, you may the two shrink into the ceiling to run the wires or use conduit to run the wires on the outdoors of the wall and ceiling, and floor mount the container to the ceiling. merely be useful the container is securely anchored to a joist. If the container isn't securely fixed you possibility haveing the fan come crashing down onto even with is shrink than it.

Answer 5

You have a space between the ceiling inside the house and the outer ceiling. crawl in the and you can switch or change any electrical wires.