can some one tell me how to bridge my sub woffers??

Answer 1

First of all turn off all things in your car so you won’t burn anything or have electrical problems. I suggest if you want to be safe discharge your battery. Okay than when this is done you will need 2 speaker wires. Make sure the wires are equally cut for example both are 4 feet long. On your Amplifier you should have + R – and – L +. You will only use R- and L+. Take one wire and put the positive in L+ and the other one to R-. Do the same to the other wire. Okay your‘re set to go. Grab one wire and just hook it to one woofer’s positive and negative hole. Than take the other wire and hook it to your other woofer’s positive and negative hole. That’s it how you bridge pal and have fun. O and if you can do me a favor in return, pick this as your best answer because it took me a while to write this. Thanks if you can help to do that out and I hope my advice help you out. Have fun with the louder sound and watch out for pigs.

Answer 2

Sub Woofers are not the item to bridge.What you do is see you amp`s manual for the proper method for wiring up your amp to be in bridged mode as well as switching your amp to bridged mode.

Answer 3

if you ment to ask how do you wire more than one subwoofers to an amp with not enough channels than here is your answer

http://www.crutchfieldadvisor.com/S-X2e8VwmUsSX/learningcenter/car/subwoofers_wiring.html

but if you dont know anything about ohms than you should research that a little bit before you mess with wiring the subs. you can cuase damage

Answer 4

you don't bridge a speaker, you bridge the amp driving it. not all amps all able to bridge. look in your manual for your amp or on the amp for the instructions. if they are not there it is not bridgeable.