i want to make one vacum cleaner for our company.we blasting a very big part about 200 ton and befor painting they we must be blasting surface of this part ,and now at the begin we found problem to cleaning our shop.we have compressur that can provide compressed air at 10 bar and we want to use compressed air to make vacuum cleaner (suction cleaner ).
i am mechanical engineer and know the principle of this tools but i cant solve this problem with calculation becouse this is very confusing problem
2006-09-16 16:04:19 · 5 answers · asked by hadi a 1 in Science & Mathematics ➔ Engineering
i'm not a scientist but if you force air through a pipe(the suction pipe)from another pipe attached to the suction pipe at an angle say 60 degrees or so the air will flow in one direction only, the the other end there will be a vaccuum that you can use. according to how much air you force through will be how much vaccumm you get. attach and force the air on the exit side of the collection canister. make a big filter bag for collection to fit your needs. the suction side is on the input to your canister or collection device. just an idea
2006-09-16 16:17:50 · answer #1 · answered by Anonymous · 0⤊ 0⤋
You can create a vacuum using a venturi and directing it into the pick-up pipe. I'm not sure this will be the most efficient way to create the vacuum you need for this application. I would check into a more standard blower arrangement.
2006-09-18 12:22:09 · answer #2 · answered by Jeffrey S 6 · 0⤊ 0⤋
Maybe if you could spell, and write sentences correctly. I could help you with this,but I have no idea what you just asked.
2006-09-16 23:08:13 · answer #3 · answered by HEY HOW ARE YA 3 · 0⤊ 0⤋
Check out the link
www.howstuffsworks.com
Probably you can find your answer there
2006-09-17 02:44:32 · answer #4 · answered by Anonymous · 0⤊ 0⤋
http://www.exair.com/ind_hskpg_products/cv_page.htm?source=google&group=chipvac
2006-09-19 20:16:41 · answer #5 · answered by tronary 7 · 0⤊ 0⤋