2006-09-15 08:01:07 · 7 answers · asked by Guadalup 1 in Consumer Electronics ➔ TVs
Take the case apart and get the rubber membrane out and wash it in hot soapy water ! dry thoroughly, get the printed circuit board and clean the board with the printed tracks that the buttons connect to, you can use meths for this or a moist soapy cloth, dry thoroughly and reas`emble and test ! I have fixed heaps like this. If it don`t work then you have gained a little more experience !!
2006-09-15 23:55:34 · answer #1 · answered by Realist 2006 6 · 1⤊ 0⤋
It's not really cost effective to "fix" keys on your tv remote. Universal remotes are a much cheaper, easier, and less frustrating alternative, I would check out the local electronics store.
2006-09-15 08:04:08 · answer #2 · answered by Tifferz 3 · 0⤊ 0⤋
Are you sure the problem isn't the batteries? If you can't replace the batteries, it's going to be a lot cheaper to just buy a new remote.
2006-09-15 08:03:02 · answer #3 · answered by netpetman 2 · 0⤊ 0⤋
If you press the buttons and nothing happens it could be the batteries. If it isn't the batteries one time I took it apart and put a folded up paper in there to make it tighter and it worked. Good luck. How did we do it in the olden days?
2006-09-15 08:05:33 · answer #4 · answered by aimstir31 5 · 0⤊ 0⤋
depends on what's wrong with them. If they're stuck inside, open the case and realign them. If they just don;t work any more, it's time to buy a universal remote.
2006-09-15 08:03:43 · answer #5 · answered by pknutson_sws 5 · 0⤊ 0⤋
I would go and buy a new one if i were you.
2006-09-15 09:39:38 · answer #6 · answered by fryeindustries2002 3 · 0⤊ 0⤋
Buy a new one.
2006-09-15 08:02:21 · answer #7 · answered by April G 2 · 0⤊ 1⤋