English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

12 answers

Take it all off, sand it down, seal it with some pva watered down, then prime it. Try that it may well work after doing the basics.

2006-09-12 21:57:56 · answer #1 · answered by Scatty 6 · 0 0

Had this problem with a back bedroom wall in a victorian terraced house once - caused through rain penetrating the brickwork of the old chimney stack. I tried all the suggestions that have been suggested - but still had the problem. Then met 'a very nice man(!)' in the trade who told me about a product (can't remember the name) which looks a lot like aluminium foil on a roll and has a special type of sticky back to it (- no really this is not a blue peter joke!) - I remember I could only buy it from a factory outlet shop on an industrial estate - not your ordinary B&Q or something. It's applied to the wall as a permanent barrier. Then plain lining paper is applied. Then wallpaper......Check out a similar supplier locally - like Master(something or other). [I know the above is a bit vague but those in the trade WILL know what you're talking about - honest!]

2006-09-15 06:29:20 · answer #2 · answered by Anonymous · 0 0

you are probably seeing the results of the intervention of various people over many years. There could easily be both rising and penetrating damp in your walls. You do have a combination that could be described as tanking. However, I think that most of the current problems are probably due to condensation.
I would certainly get rid of the plaster coating. Any other coatings should be dealt with by my usual method. namely hit it with a hammer, if it falls off, good, if it doesn't thats ok too. I would then dry line and insulate over these remaining coatings.

2006-09-16 01:00:41 · answer #3 · answered by flymetothemoon279 5 · 0 0

Remove the paper find where the dampness is permeating from seal it add a coat of damp proofing paint to the wall before replacing wall paper.

2006-09-12 22:00:09 · answer #4 · answered by Anonymous · 0 0

you cannot . - if it s a damp wall. becoz thewall paint peels off when the wall is damp and obviously ur wall paper.

At the most u can use headless nails to nail the wallpaper onto the wall.

2006-09-12 22:11:53 · answer #5 · answered by kummu 3 · 0 0

Whatever you do (damp sealers, pva mix etc), you'll need to find the cause of the damp first, otherwise it'll just re-occur over time.

Another thing you may need to do is use a 'stain stop' product before you paint, to stop the damp stains showing through.

2006-09-12 22:09:40 · answer #6 · answered by hastetothewedding 2 · 0 0

See it if is still possible to get rolls of thin polystyrene and use these to line the wall first before applying wall paper. Ask in your local B & Q (if you have one) or DIY store for advice. I used this in a house where I used to live, and it was very successful.

2016-03-26 22:59:55 · answer #7 · answered by ? 4 · 0 0

You have to resolve where the damp is coming in first but after you can buy masonary sealer. Let it dry before you restick the wall paper.

2006-09-12 21:58:26 · answer #8 · answered by philipscottbrooks 5 · 0 0

you can get a sealent for plaster Sylexine is one not sure spelling is correct your local B&Q or hardware shop should help you, you then paint the wall with it before putting paper up again

2006-09-12 22:44:12 · answer #9 · answered by judy f 2 · 0 0

look outside and see if the caulking is damaged and then try to find out why you have moisture and then use a simple glue to fix wall paper..

2006-09-13 04:43:01 · answer #10 · answered by bluedanube69 5 · 0 0

fedest.com, questions and answers