I bought a new car recently and it came with a sticker on the inside of the back window and I would like to know how I could remove it so I can replace it with an American Flag. Id also like to remove as much of the sticky residue as I can along with it. If it is not possible for me to do this, is there somewhere I could go and have a professional do this for me?
2006-09-11 13:12:57 · 6 answers · asked by BoredomStrikes 3 in Cars & Transportation ➔ Maintenance & Repairs
you could use a razor blade, but without knowing if you have tint or not that could be catastrophic. if you don't have tint, then use the razor blade, and then to remove the residue, use zippo lighter fluid or equivelant, it takes off the adhesive, and won't leave an oily residue.
2006-09-11 13:40:03 · answer #1 · answered by Nathan R 2 · 1⤊ 0⤋
Goo Gone gel, available at your local Wal-Mart or Target, will work fine. The gel will adhere to the sticker on a vertical surface better than the liquid. If the gel is not available in your area, soak a paper towel with the Goo Gone liquid and hold it against the sticker until the sticker rubs off.
2006-09-12 16:46:30 · answer #2 · answered by Drew K. 1 · 0⤊ 0⤋
Razor blade for the sticker, then lighter fluid on a rag for the sticky. Wd40 can stain your interior, I don't recomend it.
2006-09-11 13:26:17 · answer #3 · answered by sadaunt78 2 · 0⤊ 0⤋
Yeah the Lighter Fluid would work, or just use some Rubbing Alcohol. I don't think Rubbing Alcohol would stain anything either.
2006-09-11 13:48:40 · answer #4 · answered by Dax R 1 · 0⤊ 0⤋
AS LONG AS IT HAS NOT BEEN TINTED AS TOLD USE A RAZOR THEN USE TAR AND GLUE REMOVER. CAN GET IT FROM MOST PLACES.
WD 40 IS OILY AND WILL TAKE AGES TO GET OFF.
LIGHTER FLUID CAN CAUSE PROBLEMS WITH THE HEATED SCREEN
2006-09-12 07:42:41 · answer #5 · answered by mike the mechanic 2 · 0⤊ 0⤋
just use a good razor blade then if any goo is left use wd-40. After that use a good window cleaner.
2006-09-11 13:23:22 · answer #6 · answered by chazzer 5 · 0⤊ 0⤋