2006-09-11 05:13:11 · 5 answers · asked by MurlMargaret H 1 in Home & Garden ➔ Do It Yourself (DIY)
scape marble dust from the back of the piece with a scraper, mix with epoxy resin of the appropriate color, fill the crack mostly with resin then dust on the dust to finish filling with just enough resin to bind it, scrape level with surface when fully cured then wet sand with very fine sand paper on a block to polish.
2006-09-14 15:53:01 · answer #1 · answered by Michael S 4 · 0⤊ 0⤋
Counters can be polished to eliminate stains or scratches. Small cracks or chips may require resin injection and polishing, a job best left to professional restorers. Pitting is common with granite and most polished igneous rocks so you must be prepared for how the stone will age. Fissures also occur naturally in many stone types. This visible separation differs from a crack in that it is a naturally occurring feature in the stone and one that contributes to its character.
What you could do (as I do all the time), I go to the Home Depot and talk to the stone(marble, etc) guy and ask him for any additional ideas. Sometimes the individual is knowledgeable and sometimes not.. So.. (it sounds stupid) but I go to several of the Lowe's or home Depot places and ask again and again but always to a different guy... I get some good ideas that way also.
2006-09-11 05:17:52 · answer #2 · answered by Anonymous · 0⤊ 0⤋
Silicone Filler and the a coat of glazing.
2006-09-11 05:16:25 · answer #3 · answered by marie1257 4 · 0⤊ 0⤋
super glue and a accelerator buy at home depot
2006-09-11 05:15:02 · answer #4 · answered by sportlvr45 4 · 0⤊ 0⤋
id use a adhesive or caulking then put pressure on it till it sets up.
2006-09-13 12:13:21 · answer #5 · answered by duc602 7 · 0⤊ 0⤋