head tourque seatings 2.0 gt primera?

Answer 1

toy didnt give enoulf info i can tell you they use stretch bolts you tighten then to say 50 foot pounds thain you twist them 1/2 turn more always use new bolts they dont need to be re torqued
ask the macheins shop that did the head work for the specs they will tell you
if your replacing the head gasket always get the head milled

Answer 2

Maximum bolt length 158.2 mm as long as the bolts are not longer than this you should be okay using them again , if you are using new bolts then it's a bit complicated depending on what year it is 91-96 it goes like this 39 NM , 78 NM , slacken off 360 degrees then tighten 34-44 Nm then tighten 90-100 degrees then another 90-100 degrees . 96-02 same bolt length 39 Nm then 78 Nm slacken off 360 degrees tighten 39 Nm tighten 90-95 degrees tighten 90-95 degrees 02 - 04 new bolts needed tightening sequence is 98 Nm slacken 360 degrees tighten 34-44 Nm tighten 75-80 degrees tighten 75-80 degrees hope this covers what you need

Answer 3

try google, wikipedia or ask.com