It happened suddenly when i was working on my Computer it suddenly hanged and hard disk stopped responding. I want the data in D, E,F drives. What do I Do????????//
2006-09-10 07:38:23 · 10 answers · asked by Shashi 1 in Computers & Internet ➔ Hardware ➔ Other - Hardware
I had similar problem...I used to switch off the main and switch on again...it used to work...then I found my ram socket is dirty..I pulled it out, cleaned and put it back...now OK.
2006-09-10 18:38:34 · answer #1 · answered by Anonymous · 2⤊ 0⤋
It sounds like your HD has failed. If D, E, F are partitions on the failed drive you may not be able to recover the data without spending a small fortune for a data recovery service. Only you can determine if the cost is worth it.
If they are separate drives, buy and install a replacement C drive, re-install windows, then access your other drives as usual. Windows will recognize them when you re-install but they may not have the same letter as before. Good luck!
2006-09-10 07:56:58 · answer #2 · answered by ? 5 · 0⤊ 1⤋
Oh ok that is serrious problem: did you reinsert the disk in hard
drive? well according to D,Eand F they needed to be upgraded
because any data can be lost if not loaded correctly see here diskett is aC.D rom program for windows XP system or newer type of computers plus anti virus scan required ask a computer
expert
2006-09-10 08:00:33 · answer #3 · answered by toddk57@sbcglobal.net 6 · 0⤊ 1⤋
Hopefully your data was backed up as it sounds like the hardware crapped out - you can try to remove it (unplug comp, open case, remove connectors and replug them to attempt + check to see if HD if seated firmly
2006-09-10 07:50:09 · answer #4 · answered by shortcut 2 · 0⤊ 1⤋
An 08 Kia? isn't it nonetheless decrease than guarantee? Take it lower back and get them to repair it right. further i understand how troublesome this is. Been there. Take it lower back and insist a loaner. you will in all possibility ought to argue with them. Ask for his or her supervisor. If no longer happy, ask for his or her supervisor, and then the subsequent in case you ought to till at last you get what you elect. Dealerships may well be intimidating, yet carry your floor. they choose your organization. good success
2016-12-18 08:05:27 · answer #5 · answered by gerrit 4 · 0⤊ 0⤋
Im so sorry.
It means the harddisk head touched the plotter.
You cant able to get the data back.
2006-09-10 21:18:49 · answer #6 · answered by Aswin Suriya 2 · 0⤊ 1⤋
try to boot from a live Linux distro(cd) like knoppix then check if you can access the drives you mentioned.
another way is try to boot from the windows xp cd then form the recovery mode try if you can access the drives
if you can install hddlife www.hddlife.com/eng/download-freeware.html
and check the status
2006-09-10 07:52:56 · answer #7 · answered by anniyan 2 · 0⤊ 1⤋
I don't know if it's a circuitry problem, but in that case, the circuitry of a HDD can be replaced (not all can do this) and the media remains safe.
2006-09-10 07:41:34 · answer #8 · answered by ri_ma_bo 4 · 0⤊ 1⤋
hope you had the data backed up
2006-09-10 07:40:49 · answer #9 · answered by LW 4 · 0⤊ 1⤋
buddy d problem is in ur RAM ....unplug it from its socket ...cleen it wid..
and socket also
den insertt again
ur pc ll work
2006-09-10 07:57:04 · answer #10 · answered by wildeve h 1 · 0⤊ 1⤋