My washing machine has a blockage there is water gathered in the bottom and it wouldnt drain it away. What can I do to get my machine back up and running?
2006-09-10 06:37:15 · 5 answers · asked by Olderwiser 4 in Home & Garden ➔ Do It Yourself (DIY)
Try each of these in the following order:
1) Check that there are no kinks in the drain hose.
2) Check that the pump is actually working. If you can't hear it, you need a new one.
3) Clean out the drain filter. Warning: When you open it, all the water will come out! Stand by with a bowl and bucket.
4) Take the back off and disconnect the drain hose at both ends. Poke out the blockage with a stiff wire (coathanger wire is ideal)
2006-09-10 06:44:40 · answer #1 · answered by Anonymous · 2⤊ 0⤋
first ingredient you may want to do is discover out the position the water is truly coming from. i might want to take off the back panel face it too you and put in an total load you need to be in a position to discover it then. optimistically you basically might want to tighten something if the leak persists a joint after tightening you'll get some teflon tape from a shop take it aside placed the teflon in and screw it back at the same time. even if that's leaking out of a mechanical area you've too replace that area or basically purchase a sparkling washer.
2016-11-25 23:44:40 · answer #2 · answered by ? 4 · 0⤊ 0⤋
Remove and clean all the fluff and rubbish from the filter, and then clean it regulary thereafter. Instructions in your handbook or on Bosch website.
2006-09-10 07:42:39 · answer #3 · answered by jayktee96 7 · 1⤊ 0⤋
clean the filter out on it and run it through with nothing in it
2006-09-10 06:40:37 · answer #4 · answered by ♥fluffykins_69♥ 5 · 0⤊ 0⤋
check for kink in drain hose
2006-09-10 06:45:41 · answer #5 · answered by Anonymous · 1⤊ 0⤋