I want to install a windshield in my ranger. Any help would be appreciated.
2006-09-10 02:46:59 · 5 answers · asked by dncallery 1 in Cars & Transportation ➔ Maintenance & Repairs
This windshield is glued in with urethane sealant, which is an extremely strong sealant once it is cured. It is very difficult to cut this sealant in order to remove the windshield. Also, the windshield has a separate molding that attaches to the edge of the glass BEFORE it is installed. I highly recommend that you pay a qualified professional to install this windshield because windshields are made to be a structural part of your vehicle. If the windshield/sealant system is improperly installed, then the results could be disastrous. If you insist on doing it yourself, then email me and I will help.
2006-09-13 15:17:59 · answer #1 · answered by GlassMan 2 · 0⤊ 0⤋
Do you have a draw knife caulking gun, sealant windshield moulding know how to take off the wipers and front cowl? I have the tools and still call the glass guys they are fast and clean up when there done and cost compaired to doing it my self if I carck the new glass I loose. If they crack the new class you get a good one win win.
2006-09-10 02:53:38 · answer #2 · answered by John Paul 7 · 0⤊ 0⤋
I did it, you have to cut the urethane adhesive loose with a wire all around push the old glass out and clean up as best you can, then reverse the process going back together... it's easier to pay a guy to do it for you at the glass shop, they have all the tricks and tools.
2006-09-10 02:52:03 · answer #3 · answered by Michael S 4 · 0⤊ 0⤋
Call The Auto Glass People, Its the best way.
2006-09-10 03:11:18 · answer #4 · answered by Anonymous · 0⤊ 0⤋
2 pts
2006-09-10 02:48:47 · answer #5 · answered by Anonymous · 0⤊ 0⤋