English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

Readout shows black ink level at 20% but will not print anything when copying or printing documents, when I change a document to say red text still will not print

2006-09-09 04:32:45 · 4 answers · asked by DAN B 1 in Consumer Electronics Other - Electronics

4 answers

Try this site to clean the cartridges - also use an alcohol swab to clean teh contact points in teh machine itself

http://support.lexmark.com/cgi-perl/knowledgebase.cgi?ccs=37:1:0:269:0:0&emeaframe=&docid=ENUS18888

2006-09-09 04:40:37 · answer #1 · answered by Panther 3 · 0 0

Had this difficulty with yet another named printer. They stored sending replacements, and all worked an identical. i replaced into advised the paper is drawn in on the astonishing -- no longer around the full sheet. i spotted the paper instruction manual on the left, this is meant to hold the paper right this moment, replaced right into a million/2 as long as that on my older printer. After lots frustration I solved the subject with the help of having my husband bend a chew of steel right into a precise attitude. With a great binder clip, I clipped the flat end of the attitude close to the best of the paper feeder alongside the left factor of the paper. This keeps the paper feeding right this moment. Been a twelve months and a a million/2 and it continues to be doing the interest. I comprehend we ought to continuously no longer ought to try this, yet issues are continuously being made extra cost-effective and the producer probable saved 2 cents on the shorter piece of plastic.

2016-11-06 23:37:34 · answer #2 · answered by ? 4 · 0 0

Hi. Try going into the "cartridge maintenance" option in the control program and run "clean nozzle".

2006-09-09 04:39:55 · answer #3 · answered by Cirric 7 · 0 0

The jets may be dryed out.

2006-09-09 04:39:59 · answer #4 · answered by Ibredd 7 · 0 0

fedest.com, questions and answers