is there anyone on hear that nows a bout washer machines faults?

Answer 1

yep i nows ABOUT WASHING machines(& i KNOW how to use spell check too)

Answer 2

if the dial just keeps turning then the circuit board is shot you need a new board .

if it keeps stopping or won't go then you probably need new bushes , in the mean time clean the copper on the end of the motor where the bushes touch it , its easy to find because its the only copper you'll see and it wil have a band of black dirt around it .

make sure you check first that the fuse hasn't gone in the plug and make sure you unplug the washer before going inside .

Answer 3

first element i might do is verify and make advantageous the drain hose is inserted exact. however if this is, and additionally you nonetheless have overflow, you will possibly have some blockage in the drain that replaced into no longer observed mutually with your previous washer because of the fact it did no longer pump water into the drain as speedy. in case you're delicate doing so, attempt and sparkling the blockage. in case you haven't any longer any theory the thank you to realize this, call a plumber.

Answer 4

Do you mean- 'Is there anybody on here that knows about washing machine faults'? If so the answer is 'yes', what's the fault? and make/model of machine?

Answer 5

depends on wats it doin im a repair man i do this all day make model no and and descripton of fault plz and i might be able to help u

Answer 6

Can possibly help, but would need to know the problems you are having.

Answer 7

Only from necessity and the school of hard knocks.

Answer 8

E40 means the door is open.

Answer 9

depends wot the problem is i would ring the manafactora

Answer 10

What's the problem?