we put in a new alpine head unit and infinity reference speakers and the stereo sounds bad i cant figure out why evrythings is hooked up right is there factory crossovers in the car that need to be remover or anything
its a 1997 dodge avenger es it has the 6 speaker steroeo not the infinity system. any reasons please help
2006-09-07 15:31:27 · 6 answers · asked by Anonymous in Cars & Transportation ➔ Car Audio
the quality of sound is bad there are few highs distortion at any volume over 20 alot of bass distrotion sounds just like a stock car steroeo from the 1990's.
2006-09-07 15:40:04 · update #1
it doesent have factory speaker it has new infinity reference speaand 6x9 and 6.5 and stock infinity tweeters
2006-09-07 15:47:11 · update #2
no external crossovers it has a alpine CDA-9856
2006-09-07 15:49:15 · update #3
What is wrong with the sound? Bad is not descriptive enough for us to troubleshoot the problem.
2006-09-07 15:37:02 · answer #1 · answered by B R 4 · 0⤊ 0⤋
Infinity speakers are all 4ohm, so that should be fine.
I don't know if the reference come with external crossovers (might only be the kappas), but you might want to make sure that you hooked that up properly if they do.
Which Alpine HU did you get? Unless it is a really high end one, i don't think it would have any built-in crossovers (they've really skimped on advanced features with this year's models).
2006-09-07 15:46:39 · answer #2 · answered by derekdemeter 3 · 0⤊ 0⤋
that's the floor in both your stereo or your amp. in case you bypass to a vehicle stereo save they're going to attempt to promote you a noise reducer, although that's wasted funds. in basic terms discover the black twine on your stereo amp or in spite of else you've operating and make positive it truly is creating an outstanding connection with metallic on the vehicle. the purely different risk is crappy rca cables, even though it truly is maximum in all probability the floor. in case your battery is getting more desirable than 12volts at the same time as the vehicle is off, that's no longer the alternator. If the battery reads below 12.a million that's the alternator.
2016-11-06 21:11:07 · answer #3 · answered by Anonymous · 0⤊ 0⤋
if ur turning it up too high the head unit will distort b/c it doesn't have enough power. There is no way they can put 200 watts into a unit that size so all u really get is more like 20 watts and that isn't enough to power most speakers
2006-09-07 16:08:28 · answer #4 · answered by mike l 2 · 0⤊ 0⤋
Check factory speaker "impedance". Do they match what is called for in the Alpine manual? Impedance mismatch can fry your amplifier "outputs". Please be careful about "loading" of amplifier output transistors..:-)=
2006-09-07 15:41:01 · answer #5 · answered by Jcontrols 6 · 0⤊ 0⤋
Try adjusting the settings on the stereo itself.
2006-09-07 16:01:30 · answer #6 · answered by ezachowski 6 · 0⤊ 0⤋