My son could use one of these. His alarm clock is never loud enough to get him out of bed!
Well, although I don't think you can just walk into your local Wal*Mart and by this, they do make a stand alone smoke detector that has an ability to work as "multiple stations", i.e. it can be hardwired to other detectors, I think they have new "wireless" ones too!. The basic idea is that if one goes off, they all go off. The trick would be to find out what makes the detector trip, and then wire it to a timer module (your alarm) so that it tripped the detector every morning that you had the timer plugged in. You'd have to be good at figuring out the internal electronics of such a device or buy a 110 volt relay. The timers can be purchased at Wal*Mart, but not the relay. Radio Shack would probably have both. The detector is going to have to be ordered, but here I have provided some suggestion products below.
If you are good at "messing with" the internal electronics and are good with a soldering gun, you could just wire the timer to engage the test swtich on the detector, for that, any cheap smoke detector would work, but you are probably violating the listing of the device.
Sounds like an interesting little electronics project! Good luck and be careful if you decide to attempt it.
2006-09-09 02:23:38
·
answer #1
·
answered by todvango 6
·
0⤊
0⤋