can ne1 help me set up my jvc rx884 receiver?

Question

spkrs and sub,components seem 2b hooked up fyn, still no music

Answer 1

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Look up your receiver's troubleshooting guide and double-check everything. Otherwise, contact your local consumer electronics merchant (preferably the one you purchased your receiver from) and get some technical help from them.

H a p p y
H o m e
T h e a t e r i n g !
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Answer 2

There could be several reasons why you are not getting sound.
Is there a mute button? Make sure it is not turned on.
Is there a tape monitor button? Make sure it is not engaged.
Make sure your speakers are engaged, if they are hooked on to speaker A ,that speaker A is engaged and on.
Also on some receivers if there is a speaker hook up for two speakers (A or B) and speaker A and B are engaged but there is no speakers for B it will mute the entire speaker system so no sound is coming from A, make sure B is turned off.
ON the back of your receiver is there any fuses? Make sure there are no blown or missing fuses.
Try connecting your speakers to B , if there is one , and see if you can get sound then,
If none of these suggestions work, then take your receiver into a repair shop.

Answer 3

The jvc rx884 has "assignable inputs".

That is you can mix and match input types to various buttons.

For example video 1 may get its picture from s video input 1 and it's audio from optical 2

OR

Second example Video 1 may get its picture from component 2 and its audio from digital 1.

ETC

I know reading the directions sucks but if you locate the section on assigning inputs and check your receiver's set up that may very well fix your problem.

Answer 4

Check to make sure that you have not accidentally pressed the "tape monitor" button. If so, press it again to turn off that function.