try these tips...... they relle work!!
Hair Wash
The best way of washing hair is with Aritha and Shikakai Powder. It does not have any chemicals or any other side effects. Aritha and Shikakai powder is available at any General stores or even a banyan shop.
Shampoos
Dry Hair - Egg, Herbal shampoo or any shampoo for dry hair.
Normal Hair - For normal hair fruit shampoos or henna shampoo is good.
Oily Hair - Lemon Shampoo
Hair Oil
Oil your hair at least once in a week. If you have dry hair then oil it twice a week. Hair oil gives the necessary moisturizers to your hair. Herbal hair oil provides you the necessary nourishment along with the moisturizers.
Hair Conditioners
Henna
Henna conditions and colours your hair.
Dry hair - Add some milk, water and 1-2egg yolks in henna. This mixture will not dry your hair and will make it soft and manageable. Apply it monthly.
Normal to Oily Hair – Add water, lemon, egg yolks in henna. You can apply Henna fortnightly.
Home made conditioners
Add ¼ cup of vinegar in ½ bucket of water. This will give a good shine to your hair. Mix curds and egg yolks together and apply it for 1hour.
Hair Tonics
Try tonic Hair Oil’s powder - Put 4 tsp of this powder in water, boil it and after cooling down apply it on hair. This will stop hair loss, rejuvenate and nourish your hair.
2006-09-06 22:51:08
·
answer #3
·
answered by Anonymous
·
0⤊
0⤋
Just for you Anirude, I am copying from the following website
http://sci-toys.com/ingredients/shampoo.html
http://pubs.acs.org/cen/whatstuff/stuff/8015sci3.html
http://couponing.about.com/cs/beautyproducts/a/shampooingred.htm
The most common ingredient in shampoos is also the most common detergent in use in other products, a class of surfactants known as straight-chain alkyl benzene sulfonates. An example is Ammonium Lauryl Sulfate, or its sodium relative, or the slightly larger related molecule ammonium lauryl ether sulfate, sometimes abbreviated as ammonium laureth sulfate.
These detergents work best in water that has little calcium and magnesium, as these elements bind to the detergent and make an insoluble scum. So tetrasodium EDTA is used to sequester the calcium and magnesium from the detergent, while keeping them soluble, so they rinse away without scum.
Cocamide DEA (or MEA or TEA) is used as a foaming agent, to make the lather. The other surfactants will generate a certain amount of suds, but this foaming agent is added to get the amount just right. Besides its foam stabilizing effects, it is also a viscosity booster (it's thick).
Another foam stabilizing detergent is PEG-5 cocamide, which is a foam stabilizer, surfactant, and emulsifier.
The detergent cocamidopropyl betaine is added for several of its special properties. It is milder on the skin than the benzine sulfonates, so adding it to the mix reduces the amount of the harsher detergents needed. It is thicker than the other ingredients, so it can be added to make the mix have the right viscosity. It has anti-static properties, so the hair doesn't generate an electric charge and jump to the plastic combs and brushes used when drying the hair. It is a humectant, attracting moisture from the air, thus keeping hair from drying out. Lastly, it has antibiotic properties that can prevent spoiling of the shampoo.
The surfactant ammonium xylenesulfonate is a hydrotrope, a compound that makes it easier for water to dissolve other molecules. It is added as a thickener, and to help keep some of the odd ingredients added for marketing effect in solution, including perfumes. Glycerol stearate is another emulsifier used for this purpose.
Special effects
The wax glycol distearate is added to make shampoos opaque and pearlescent. It has tiny flakes that mix well with surfactants, and stay in solution. They also add shear-thinning qualities, making liquid hand soaps pump out of the bottle easier.
Sodium chloride (table salt) is used to thicken the mixture if the main surfactants are sodium lauryl sulfates. If the surfactants are ammonium based, then ammonium chloride is used. Salt can make the shampoo harsh and sting the eyes, so more expensive thickeners are used to keep the salt levels low.
Modified cellulose based thickeners are often used, along with the surfactant based thickeners already mentioned.
Glycerine is added as a humectant (draws moisture from the air), as is propylene glycol, which is also a preservative.
There are many additives put in shampoos and conditioners that appear to be there mainly for marketing purposes. Honey, various herb extracts, and similar items might add to the fragrance, but are unlikely to have any effect in the concentrations used. Amino acids can act as conditioners, but the source of the amino acid is not important. Silk amino acids are no different from soy amino acids, except in the proportions of which particular amino acids are contained.
Preservatives
Two widely used preservatives, DMDM hydantoin and imidazolidinyl urea are found in many shampoos, to prevent fungal and bacterial spoilage. They release formaldehyde to kill germs.
Another broad-spectrum biocide is isothiazolinone and the related methylisothiazolinone and methylchloroisothiazolinone.
Sodium benzoate is another preservative used in shampoos. It kills bacteria, fungi, and yeasts, and works well in acidic mixtures.
Another bactericide used is 2-bromo-2-nitropropane-1,3-diol.
pH balance
The surface of a strand of hair is covered with overlapping sheets, somewhat like the scales on a fish, or the shingles on a house. This surface is called the cuticle.
Alkaline solutions raise these scales, so they stand up. This makes the hair rougher, makes it look dull, and makes the hair shafts stick together due to the rough texture.
Most shampoos are made slightly acidic, to keep the cuticle smooth and lying flat on the hair shaft. Ingredients like citric acid are added to acidify the shampoo.
As the shampoo mixes with the water in the shower or bath, or mixes with dirt on the hair, it can become less acidic as the acids mix with alkaline water or dirt. A compound that releases more acidifying ions when the acidity gets low, or absorbs acid when the acidity gets too high, is called a buffer.
A typical buffering agent used in shampoo is sodium citrate. Since the goal is to keep the shampoo slightly acid, the term "pH balanced" is actually a misnomer. We want the balance to be tipped slightly to the acidic side.
Conditioners
Conditioners are compounds added to keep the hair cuticle smooth and slippery.
Silicone oils such as dimethicone and cyclomethicone are used to make the hair shiny and slippery.
Humectants (moisturizers) like panthenol help keep the cuticle moist, so that the scales do not stand up.
Long chain fatty alcohols like cetyl alcohol, oleyl alcohol and stearyl alcohol lubricate the hair. One end of the molecule binds to the hair, leaving the slippery fatty end on the outside to rub against other strands of hair, or a comb.
Quaternary ammonium compounds are cationic surfactants that bind well to anionic surfaces like the protien in hair. The ammonium end sticks to the hair, leaving the long fatty end of the molecule to act as a lubricant. They are slightly conductive, so the reduce the buildup of static electricity.
The "quats", as they are called, include compounds like stearalkonium chloride, disteardimonium chloride, quaternium-5 or quaternium-18, polyquaternium-10 and they are all similar in form and function to cetrimonium chloride.
These compounds are also widely used as fabric softeners, for all of the same reasons they make good hair conditioners. They are also used to thicken the shampoo.
The emollient isopropyl palmitate is used as a skin softener, moisturizer, and as an anti-static agent.
2006-09-04 14:11:18
·
answer #6
·
answered by pranesh81 3
·
1⤊
0⤋